Filter by
Bristle Material
Stem Wire Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
RoHS
For Use With
Abrasive Material
About Brushes
More
Tube Brushes
Twisted Shank, 0.003 Bristle Dia. and Smaller"
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | 1-11 | 12-Up | |
Twisted Shank | |||||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||
| 0.012" | 0.014" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 00000 | 00000 |
| 0.014" | 0.018" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.014" | 0.02" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.015" | 0.024" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.016" | 0.032" | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.016" | 1mm | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.017" | 0.03" | 5/8" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.04" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.047" | 3/4" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.026" | 0.05" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.054" | 3/4" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.026" | 1.5mm | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 0.06" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.034" | 0.063" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 0.07" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.034" | 0.079" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 2mm | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.043" | 0.09" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.043" | 0.094" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.043" | 2.5mm | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 0.1" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.055" | 0.109" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 0.12" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.055" | 1/8" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 3mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 3.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 0.13" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.14" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.142" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 0.15" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.156" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 4mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 0.16" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.17" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.172" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 0.18" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.189" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 4.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 5.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 6mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 6.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
Low-Scratch Tube Brushes
Twisted Shank
Clean delicate surfaces inside tubes, pipes, and holes. The bristles won't leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | 1-11 | 12-Up | |
Twisted Shank | |||||||||||
Brass Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||
| 0.012" | 0.014" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 00000 | 00000 |
| 0.014" | 0.018" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.014" | 0.02" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.015" | 0.024" | 1/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 00000 | 0000 |
| 0.016" | 0.031" | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.016" | 1mm | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.017" | 0.03" | 5/8" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.04" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.047" | 3/4" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.026" | 0.05" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.026" | 0.054" | 3/4" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.026" | 1.5mm | 5/8" | 0.002" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 0.06" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.034" | 0.063" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 0.07" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.034" | 0.078" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.034" | 2mm | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.043" | 0.09" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.043" | 0.094" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.043" | 2.5mm | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 0.1" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.055" | 0.109" | 3/4" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 0.12" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.055" | 1/8" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 3mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.055" | 3.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 0.13" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.14" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.141" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 0.15" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.072" | 0.156" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.072" | 4mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 0.16" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.17" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.172" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 0.18" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 00000000 | 0000 | 0000 |
| 0.083" | 0.188" | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 4.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.083" | 5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 5.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 6mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
| 0.11" | 6.5mm | 1" | 0.003" | Flexible | 1 | 2 | Stainless Steel | 3" | 0000000 | 0000 | 0000 |
Low-Scratch Tube Brush Sets
Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern. The bristles won’t leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Stem | ||||||
|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Number of Bristle Spirals | Number of Wires | Wire Material | Each | |
Brass Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||
| 6 | Twisted Shank Brush—1 mm Brush Dia. × 5/8" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—1.5 mm Brush Dia. × 5/8" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—2 mm Brush Dia. × 3/4" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—2.5 mm Brush Dia. × 3/4" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—3 mm Brush Dia. × 1" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—3.5 mm Brush Dia. × 1" Brush Lg. × 3" O'all Lg. × 0.003" Bristle Dia. | 1 | 2 | Stainless Steel | 0000000 | 000000 |
| 6 | Twisted Shank Brush—4 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—4.5 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—5 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—5.5 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—6 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. Twisted Shank Brush—6.5 mm Brush Dia. × 1" Brush Lg. × 4" O'all Lg. × 0.003" Bristle Dia. | 1 | 2 | Stainless Steel | 0000000 | 00000 |
Sanding Tube Brushes
Twisted Shank and Flexible Bristles
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step. The nylon bristles won't leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Flexible bristles are used to remove light-to-medium rust and stains and small burs.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Abrasive Material | Grit | 1-11 | 12-Up | |
Twisted Shank | ||||||||||||
Flexible Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||||
| 0.016" | 0.035" | 5/8" | 0.008" | 1 | 2 | Stainless Steel | 3" | Alumina Silicate | 1,000 (For Polished Finish) | 0000000 | 000000 | 00000 |
| 0.016" | 1mm | 5/8" | 0.008" | 1 | 2 | Stainless Steel | 3" | Alumina Silicate | 1,000 (For Polished Finish) | 0000000 | 00000 | 00000 |
| 0.026" | 0.052" | 3/4" | 0.008" | 1 | 2 | Stainless Steel | 3" | Alumina Silicate | 1,000 (For Polished Finish) | 0000000 | 00000 | 0000 |
| 0.026" | 0.054" | 3/4" | 0.008" | 1 | 2 | Stainless Steel | 3" | Alumina Silicate | 1,000 (For Polished Finish) | 0000000 | 00000 | 0000 |
| 0.026" | 0.069" | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.026" | 1.5mm | 5/8" | 0.008" | 1 | 2 | Stainless Steel | 3" | Alumina Silicate | 1,000 (For Polished Finish) | 0000000 | 00000 | 00000 |
| 0.034" | 0.087" | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.034" | 2mm | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.043" | 0.103" | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.043" | 2.5mm | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 0.12" | 3/4" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 0.138" | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 0.156" | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 3mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 3.5mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.055" | 4mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.072" | 0.172" | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.072" | 0.189" | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.072" | 0.208" | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.072" | 4.5mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.072" | 5mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 0.11" | 5.5mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 00000 | 00000 |
| 0.11" | 6mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 00000 | 00000 |
| 0.11" | 6.5mm | 1" | 0.012" | 1 | 2 | Stainless Steel | 3" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 00000 | 00000 |
| 1/8" | 1/4" | 1" | 0.012" | 1 | 2 | Galvanized Steel | 5" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
| 1/8" | 5/16" | 1" | 0.012" | 1 | 2 | Galvanized Steel | 5" | Aluminum Oxide | 600 (For Polished Finish) | 0000000 | 0000 | 0000 |
Tube Brushes for Closed-End Holes
Bristles at the top of these brushes clean the bottom of closed-end holes. The bristles are enclosed in a tube, which prevents them from flaring during use and allows you to alter their length. As the brush wears, trim the tube with a pipe cutter to expose more of the bristles.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Brush | Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | O'all Lg. | Max. Speed, rpm | For Use With | Each | |
Round Shank | |||||||||
Steel Bristles—For Use On Steel, Plastic | |||||||||
| 1/4" | 1/4" | 3 3/4" | 0.010" | Flexible | 3 3/4" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 000000 |
| 3/8" | 3/8" | 3 3/8" | 0.010" | Flexible | 3 3/8" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 00000 |
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||
| 1/4" | 1/4" | 3 1/4" | 0.010" | Flexible | 3 1/4" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 00000 |
Spray Nozzle Cleanout Tools
The tapered tip is wider at the base and thinner at the tip, allowing this tool to clean out residue and dirt from nozzles, aerosol spray heads, and other small openings of various sizes, allowing for an even spray.
Tip | Handle | |||
|---|---|---|---|---|
| Material | Lg. | Material | Pkg. | |
| Stainless Steel | 1" | Plastic | 0000000 | 000000 |