Keep an eye on leaks, overflow, and temperature changes near your equipment, even when you’re offsite. These detectors connect to your Wi-Fi to send alerts about moisture, temperature, and humidity to your smartphone or tablet. Place them near tanks and tubs to watch for overflow, or near sump pumps and pipe lines to monitor temperatures and prevent frozen pipes. When water touches one of the sensors on the detector, a buzzer also goes off, alerting anyone nearby. Rated IP44, these detectors are protected from objects larger than 1mm, such as wires, and from water splashing in any direction.

Download an app onto your smart device to program temperature and humidity ranges and set up alerts. You can also create reports that show changes in temperature and humidity over time.

To extend the area they monitor, these detectors come with a detachable cable sensor that senses moisture along its entire surface. Swap in replacement cable sensors for worn sensors, or link several together to wrap around large equipment or trace the path of a pipe. Extend them up to 500 feet from detectors.

Check the moisture content of wood and other building materials. Meter uses two noninsulated electrode pins that are mounted directly to the meter. For deeper penetration, two insulated electrode pins attach to the meter with a 3-ft. cord.

This unit has three scales. The wood scale measures moisture from 6% to 60% in lumber, studs, and flooring. The drywall scale measures moisture from 0.1% to 6%. A comparative reference scale reads from 0 to 100 and is used in nonwood materials such as concrete, insulation, and roofing. Meter accumulates up to 100 readings and gives you an average.