These arms have a VESA (Video Electronics Standards Association) standard mounting hole pattern to attach a monitor.

Style B have a hollow mounting pole for routing cords.

For technical drawings and 3-D models, click on a part number.

Mount monitors to round and square bars, such as equipment handles and support beams. These arms have a VESA standard mounting hole pattern to attach monitors, tablet holders, and other compatible devices. Tilt your screen for a better view or raise it to eye level—ball-and-socket joints give these arms 360° range of motion.

Clamp-on pipe-mount arms have jaws at their base that grip round bars, pipes, and railings. These are often used to mount screens to cart handles.

Clamp-on rectangular-bar-mount arms have plates that clamp to rectangular parts for a secure hold. Use them with square posts, T-slotted framing, and shelving units. These arms have an additional AMPS standard mounting hole pattern, which is commonly used to attach tablet holders and keyboards.

For technical drawings and 3-D models, click on a part number.

Your entire workstation mounted on a single arm. These arms have two plates, each with its own industry-standard mounting pattern. Connect monitors, tablets, keyboards, and other compatible devices to them. Swing your keyboard out of the way or tilt your monitor for a better view—these arms have ball-and-socket joints for 360° range of motion. To keep a configuration, simply lock the joints in place.

VESA (Video Electronics Standards Association) mounting hole patterns attach to monitors. AMPS mounting hole patterns attach to keyboards. To connect two devices with VESA mounting hole patterns, use adapters (sold separately) to convert the AMPS end mount to a VESA end mount.

Rectangular bar-mount arms have a base that clamps around rectangular parts, such as square posts, t-slotted framing, and rails. They’re commonly used on forklift cages.

Bench-top mount arms have a mounting plate at their base that screws into a surface, such as a tabletop or vehicle floor.

For technical drawings and 3-D models, click on a part number.

Position your tablet within view while keeping your hands free to work. These arms mount to a variety of surfaces while keeping a secure grip on your tablet.

Clamp-on bench-mount arms attach to the edge of a workbench or tabletop. They have two pivot points that rotate 360°. The joint behind the tablet holder allows you to rotate the screen and tilt it for a better viewing angle. No need to lock them in place—the pivot points stay in position on their own.

Bar-, pipe-, magnetic-, suction-, and threaded-stud-mount arms have ball-and-socket joints that give them a 360° range of motion. Tilt or rotate them for a better viewing angle and lock the joints in place.

Clamp-on rectangular bar-mount arms have a base that fits around rectangular parts, such as square posts, t-slotted framing, and shelving units.

Clamp-on pipe-mount arms attach to round bars, pipes, and railings using adjustable jaws. They’re commonly used to mount screens to cart handles.

Magnetic-mount arms cling to magnetic surfaces and have a strong enough hold to be mounted from any orientation, such as on the side of a machine. They’re good for creating a temporary display because they’re easy to move from place to place.

Suction-mount arms are ideal for mounting tablets onto flat surfaces and windows, such as the windshield of your vehicle. The suction cup base creates a strong hold to keep the arm mounted from any orientation. They’re easy to remove and install, so they’re good for when you want a temporary display.

Threaded-stud-mount arms have a telescopic pole for adjusting the display height. Screw them into tapped holes that have identical thread size. They’re often used to mount tablets on coordinate measuring machine (CMM) fixture tables.

For technical drawings and 3-D models, click on a part number.

These arms lock around the top and bottom edges of tablets to keep them from shaking loose in areas with strong vibrations. They’re often used to mount tablets onto forklifts and other machines. Their ball-and-socket joints rotate 360°, so you can move these arms in any direction, then lock them in place.

Rectangular-bar mount arms fit onto square posts and rails, which are often found in forklift cages.

Pipe mount arms clamp onto cart handles, railings, and other round supports.

For technical drawings and 3-D models, click on a part number.

Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance. They have a VESA (Video Electronics Standards Association) standard mounting hole pattern to attach a monitor.

Mount flat-panel displays close to a wall. These mounts have a standard Video Electronics Standards Association (VESA) mounting hole pattern for compatibility with monitors. After installing your display, tilt these mounts up or down to create the best viewing angle. They have a low-profile design for a sleek appearance.

For technical drawings and 3-D models, click on a part number.

Keep smartphones and irregularly-shaped devices, such as radios, in sight and within reach. These arms mount to a variety of surfaces and have 360° range of motion thanks to their ball-and-socket joints. Tilt or rotate them for a better viewing angle and lock the joints in place.

Arms for smartphones have spring-loaded brackets to grip the outside of your smartphone while leaving the screen visible.

Arms for irregularly-shaped devices hold mobile devices that don’t have a uniform shape, such as radios and GPS navigators. They have rubber fingers that adjust to fit around curves, avoid antennas, and grip asymmetrical devices.

Clamp-on rectangular bar-mount arms have a base that fits around rectangular parts, such as square posts, t-slotted framing, and rails.

Clamp-on pipe-mount arms attach to round bars, pipes, and railings using adjustable jaws. They’re commonly used to mount screens to cart handles.

Magnetic-mount arms cling to magnetic surfaces. They have a strong enough hold to be mounted from any orientation, such as on the side of a machine or overhead on a ceiling.

Suction-mount arms are ideal for mounting devices onto flat surfaces and windows, such as the windshield of your vehicle. The suction cup base is strong enough to keep the arm securely mounted in any orientation.

For technical drawings and 3-D models, click on a part number.

Ball-and-socket connections allow 360° positioning. Choose a complete arm or select a base, connectors, and accessories to build your own.

To ensure compatibility, select components that have the same ball diameter. Use reducing connectors (sold separately) to pair components with a 1 1/2" ball diameter to those with a 1" ball diameter.

For technical drawings and 3-D models, click on a part number.