Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.

Safely turn motors on and off near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

Install these switches in areas with oil, coolant, corrosive chemicals, and regular washdowns. They're rated IP69K and NEMA 4X and 12 or 12K.

Use these switches with motors that run forward and backward, such as motors for conveyor belts.

Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.

Combine a switch and a thermal overload element to build a starter that can handle high-current-rated motors. Also known as a NEMA starter.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.

Housed in a durable steel enclosure.

Set these controls to automatically adjust motor speed.

Rated NEMA 4, these controls are protected from washdowns.

Use these controls with motors that run forward and backward, such as motors for conveyor belts.

Use these controls with motors that run forward and backward, such as motors for conveyor belts.

Mount these monitors to DIN rail.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.

Your standard light switches—these switches stick out of your mounting surface and flip on and off.

Control multiple lights in the same footprint a standard light switch fits in.