We will reply to your message within an hour.
More
Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.
Rated NEMA 4X, these switches are protected from corrosion and washdowns.
These switches are housed in a protective enclosure.
Use these switches where ignitable gas and dust may be present. They're rated Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G for hazardous locations.
These switches are rated NEMA 3R for protection from falling water and light splashing.
Use these switches with motors that run forward and backward, such as motors for conveyor belts.
Rated NEMA 4, these switches are protected from washdowns.
Assemble your own motor starter by combining a switch and a thermal overload element.
Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.
Housed in a durable steel enclosure.
Combine a switch and a thermal overload element to build a starter that can handle high-current-rated motors. Also known as a NEMA starter.
Use these starters with motors that run forward and backward, such as motors for conveyor belts.
Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.
The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.
Sized to fit in tight spaces, these starters have a shorter height and narrower depth than most other starters.
Provide on/off control for a motor and protect it from overloads. These starters shut the motor off if current exceeds the full-load current rating.
With a shallower depth than most other starters, these fit in narrow spaces.
Sealed coils protect these switches against moisture, heat, dirt, and mechanical and thermal stress.
Save electricity and extend motor life by reducing the motor's starting current.
A NEMA 4X rated enclosure protects these controls from corrosion and washdowns.
Use these controls with motors that run forward and backward, such as motors for conveyor belts.
Convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
Set these controls to automatically adjust motor speed.
Mount these controls to DIN rail inside a control panel.
Rated NEMA 4, these controls are protected from washdowns.
Manually control a motor's speed.
Control the speed of low-voltage permanent-magnet DC motors.
Mount these monitors to DIN rail.
Use the mounting holes to attach monitors to a flat surface.
Plug monitors into relay sockets for fast installation and replacement.
Upgrade motor starters that use thermal overload protection with these solid-state overloads—they don't use heating elements, so enclosure ventilation and cooling is not required.
These switches are housed in a protective enclosure so they can be mounted wherever needed.
Install these switches in a panel cutout.
Rated IP66, these switches are protected from washdowns.
Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.
Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.
A raintight NEMA 3R rated enclosure protects these switches outdoors.
Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.
Stop battery drain and prevent the theft or unauthorized use of equipment by disconnecting batteries when not in use.
If there’s a power outage, flip the toggle for each circuit on these switches to backup power.
When the microcontroller inside detects a power outage, these switches automatically fire up a backup generator. They’ll switch back to utility power once power is restored.
Rated IP67 for protection from dust and temporary submersion.
Able to withstand high currents, these switches are often used with motors and pumps.
Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.