The wiring compartment is sealed to NEMA 4 standards for protection from dust, washdowns, and corrosion.

Heat shops, garages, warehouses, and other large spaces with these heaters that can be suspended from the ceiling.

Use steam from your existing boilers to evenly warm a large space.

Use steam from your existing boilers to evenly warm a large space.

Focus warm air in a specific spot.

A sensor attached to the heater might signal that it’s warm enough near the heater, while other parts of the enclosure are still cold. Moving the sensor away from the heater helps you keep electronics warm and dry, anywhere in the enclosure.

Mount these flat heaters against enclosure walls to protect electronics from cold and condensation.

Warm the air in your enclosure to keep electrical components at the ideal operating temperature. Heaters also reduce humidity, preventing condensation that causes corrosion or short circuits.

Save floor space when heating offices, workstations, and other small spaces.

Also known as toe kick or kick space heaters, these heaters are designed to recess mount under counters and cabinets.

Eliminate cold spots without taking up space. Slip these heaters into your drop-ceiling grid above windows and doorways to complement your existing heating system.

Built for outdoor use, these heaters warm people at worksites and other cold spots without access to electricity.

Use these powerful heaters to warm people in large spaces, such as warehouses.

Bolt the flange to a matching flange welded on a container wall.

Heat water through direct contact in sanitary areas such as food, cosmetic, and pharmaceutical plants.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

Use these heaters to efficiently heat chemicals in small containers—they’re sized to fit in compact openings that are 1 NPT or smaller.

These heaters install through threaded container openings or pipe couplings.

An adjustable thermostat senses the container’s surface temperature to automatically control heat output.

Also known as foil heaters, these bend around corners and edges without causing damage to the heating element.

FM approved, these heat sheets are safe for use in areas with infrequent exposure, such as from a spill or a ventilation system failure, to flammable gases, liquids, and dust.

Place your drum right on top of these heaters to start heating.

Keep gas flowing even when the temperature drops—also known as heat blankets, these heaters wrap around propane tanks to safely warm liquefied gas so it can vaporize.

These ETL-listed heaters keep containers warm in areas where hazardous material is present. Also known as heat blankets, they surround drums and totes to heat them up quickly.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters.

To prevent moisture damage, these heaters have a seamless 304 stainless steel sheath.

Heat resins, raw materials, and food with these heaters that fit around extrusion and injection-molding barrels.

Often used with extrusion, injection, and blow-molding machinery, these heaters clamp around nozzles to keep material warm for consistent discharge.

Tackle high-temperature drying, shrink-wrapping, and plastic welding jobs with your everyday compressed air supply.

Also known as circulation heaters, these install directly into pipelines.

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

These heaters have a large surface area to quickly dissipate heat in air and inert gas heating systems used in ducts, ovens, and dryers.

Keep liquid in your pipes from freezing, maintain a specific viscosity, and prevent condensation in cold areas.

Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.

Wrap the flexible heating element around small-diameter pipes and tubes or pack it into tight spaces.

Also known as self-regulating heat cable, these heaters automatically adjust heat output at different points along their length to account for differences in environmental temperature.

Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.

Heat objects from up to 8 ft. away.

Clamp to the edge of a workbench or table and adjust the arm to direct heat where you need it.