Mountable Jacks | McMaster-Carr

Filter by

Jack Type

Height

Working Orientation

Weight Capacity

Mount Type

Weight Capacity @ Maximum Lift

3,000 lb. @ 9"

1 1/2 ton @ 9"

Weight Capacity @ Minimum Height

Handle Location

Overall Height

Weight Capacity @ Height

Body Material

Mounting Plate Shape

Length

Thread Size

Lift

Base Width

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Base Length

Handle Length

Material

Width

Ram OD

76 Products

Scissor Jacks

Fit this compact jack under low-height loads.

Warning: Never use to support people or loads over people.

	Weight Capacity @ Min. Ht.		Weight Capacity @ 7" Ht.		Weight Capacity @ Max. Lift					Saddle			Base				Mounting
	tons	lbs.	tons	lbs.	tons	lbs.	Ht.	Max. Lift	Max. Wd.	Type	Lg.	Wd.	Lg.	Wd.	Handle Lg.	Body Material	Fasteners Included	No. of Holes	Hole Dia.	Features		Each
Rigid Saddle



		1/8 ton @ 4"	250 lb. @ 4"	1/4 ton @ 7"	675 lb. @ 7"	1 1/2 ton @ 9"	3,000 lb. @ 9"	4" to 13"	9"	10 1/2"	Flat	5 1/8"	2"	7 3/8"	4 1/4"	22"	Steel	No	2	3/8"	Two-Piece Removable Handle	2952T51	000000

Leveling Jacks


Side Handle Style A	Top Handle Style A	Side Handle Style B	Top Handle Style B

Top Handle Style C	Top Handle Style D	Top Handle Style E

Mount these jacks to equipment to raise and level it.

Warning: Never use to support people or loads over people.

Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate.

Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.

Triangular Mounting Plate—Jacks with triangular plate can also be welded onto your equipment. They’re commonly used with an A-frame trailer coupler.

Foot Plate—Jacks with foot plate have extra stability.

									Mounting
	Style	Weight Capacity	Ht.	Max. Lift	Overall Ht.	Handle Lg.	Body Material	For Hole Dia.	Fasteners Included	No. of Holes	Hole Dia.	Hole Lg.	Hole Wd.	Features		Each
Weld On Side Mount with Rectangular Mounting Plate







				Side Handle

				A	1 ton/2,000 lb.	10 7/8" to 20 7/8"	10"	22 3/4"	5 7/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T44	0000000


				A	2 1/2 ton/5,000 lb.	10 3/8" to 20 3/8"	10"	22 7/8"	6 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T48	00000
				A	2 1/2 ton/5,000 lb.	15 3/8" to 30 3/8"	15"	27 7/8"	6 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T49	000000




						Top Handle

						A	2 1/2 ton/5,000 lb.	14 1/2" to 29 1/2"	15"	27 1/2"	7 5/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T35	000000


						Weld On Side Mount with Square Mounting Plate







										Side Handle

										A	1 ton/2,000 lb.	15" to 30 1/2"	15 1/2"	32 3/4"	6 1/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T52	000000




												Top Handle

												A	1 ton/2,000 lb.	14 3/4" to 29 3/4"	15"	30"	6"	Steel	—	—	—	—	—	—	Foot Plate	2963T51	00000


												Weld On Side Mount with Tubular Mounting Plate







																Side Handle

																B	1 ton/2,000 lb.	10 7/8" to 20 7/8"	10"	23"	5 7/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T71	000000


																B	1 ton/2,000 lb.	15" to 30 1/2"	15 1/2"	32 3/4"	6 1/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T53	000000
																B	2 1/2 ton/5,000 lb.	10 1/2" to 20 1/2"	10"	23"	6 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T73	000000
																B	2 1/2 ton/5,000 lb.	15 1/2" to 30 1/2"	15"	28"	6 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T74	000000
																B	3 1/2 ton/7,000 lb.	11" to 21"	10"	25 5/8"	8 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T75	000000
																B	5 ton/10,000 lb.	17" to 29 5/8"	12 5/8"	39 1/2"	13 1/2"	Steel	—	—	—	—	—	—	Foot Plate	2963T81	000000




	Top Handle

	B																2 1/2 ton/5,000 lb.	11 1/4" to 21 1/4"	10"	18"	7 5/8"	Steel	—	—	—	—	—	—	Foot Plate	2963T18	000000


	Bolt On/Through Hole with Triangular Mounting Plate







																		Top Handle

																		C	2 1/2 ton/5,000 lb.	10 1/8" to 25 1/8"	15"	24 1/8"	7 5/8"	Steel	2 1/4"	No	3	—	7/16"	13/16"	Foot Plate	2933T61	00000


				Bolt On/Weld On/Through Hole with Triangular Mounting Plate







						Top Handle

						D	2 1/2 ton/5,000 lb.													10 7/8" to 25 7/8"	15"	24 3/8"	7 5/8"	Steel	2 1/4"	No	3	—	7/16"	13/16"	—	2933T35	000000


						Bolt On/Through Hole with Round Mounting Plate







																				Top Handle

										E	2 1/2 ton/5,000 lb.									4 1/2" to 13 1/2"	9"	19 3/4"	8 3/4"	Steel	1 1/4"	No	6	1/4"	—	—	Foot Plate, Slip-Resistant Rubber Pad	2953T1	000000


										E	2 1/2 ton/5,000 lb.									4 1/2" to 21 1/2"	17"	27 3/4"	8 7/8"	Steel	1 1/4"	No	6	1/4"	—	—	Foot Plate, Slip-Resistant Rubber Pad	2953T2	00000
										E	2 1/2 ton/5,000 lb.									4 1/2" to 25 1/2"	21"	31 3/4"	8 3/4"	Steel	1 1/4"	No	6	1/4"	—	—	Foot Plate, Slip-Resistant Rubber Pad	2953T3	000000

Hydraulic Jacks


Steel Pump	Aluminum Pump

Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.

Warning: Never use to support people or loads over people.

Jacks with ram center hole have an unthreaded hole for attaching a threaded rod so you can use them in pulling applications.

Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).

			Ram					Pump					Mounting
Weight Capacity	Ht.	Max. Lift	OD	Center Hole Dia.	Collar Thread Size	Oil Capacity, cu. in.	Max. Pressure, psi	Lg.	Wd.	Ht.	Oil Capacity, cu. in.	Material	Fasteners Included	No. of Holes	Hole Dia.		Each



	5 ton/10,000 lb.	1 5/8" to 2 1/4"	5/8"	2 5/8"	—	—	0.6	10,000	14 1/4"	5"	5 1/8"	20	Steel	No	2	1/4"	2897T83	000000000


	5 ton/10,000 lb.	4 3/8" to 5 1/2"	1 1/8"	1 1/2"	—	1 1/2"-16	1	10,000	14 1/4"	5"	5 1/8"	20	Steel	No	2	1/4"	2897T81	00000000
	5 ton/10,000 lb.	6 5/8" to 9 3/4"	3 1/8"	1 1/2"	—	1 1/2"-16	3	10,000	14 1/4"	5"	5 1/8"	20	Steel	No	2	1/4"	2897T82	00000000
	5 ton/10,000 lb.	8 1/2" to 13 1/2"	5"	1 1/2"	—	1 1/2"-16	5	10,000	13 1/4"	3 3/4"	5 5/8"	20	Aluminum	No	2	1/4"	2897T51	00000000
	5 ton/10,000 lb.	8 1/2" to 13 5/8"	5 1/8"	1 1/2"	—	1 1/2"-16	5	10,000	14 1/4"	5 1/8"	5"	20	Steel	No	2	1/4"	2897T71	00000000
	5 ton/10,000 lb.	10 3/4" to 17 7/8"	7 1/8"	1 1/2"	—	1 1/2"-16	12.6	10,000	25 5/8"	5 3/4"	5 3/8"	45	Steel	—	—	—	2897T72	00000000
	10 ton/20,000 lb.	4 3/4" to 6 7/8"	2 1/8"	2 1/4"	—	2 1/4"-14	4.8	10,000	21"	4 3/4"	7"	55	Aluminum	No	2	1/4"	2897T52	00000000
	10 ton/20,000 lb.	4 7/8" to 7"	2 1/8"	2 1/4"	—	2 1/4"-14	4.2	10,000	25 5/8"	5 3/4"	5 3/8"	45	Steel	—	—	—	2897T73	00000000
	10 ton/20,000 lb.	9 3/4" to 15 3/4"	6"	2 1/4"	—	2 1/4"-14	13.7	10,000	25 5/8"	5 3/4"	5 3/8"	45	Steel	—	—	—	2897T74	00000000
	10 ton/20,000 lb.	9 3/4" to 15 7/8"	6 1/8"	2 1/4"	—	2 1/4"-14	13.7	10,000	21"	4 3/4"	7"	55	Aluminum	—	—	—	2897T53	00000000
	12 ton/24,000 lb.	7 1/4" to 10 1/4"	3"	2 3/4"	3/4"	2 3/4"-16	8.3	10,000	25 5/8"	5 3/8"	5 3/4"	45	Steel	—	—	—	2902T41	00000000


	25 ton/50,000 lb.	10 3/4" to 16 7/8"	6 1/8"	3 1/2"	—	3 5/16"-12	32.2	10,000	20 3/4"	5 3/4"	6 7/8"	134	Steel	No	2	5/16"	2897T75	00000000
	25 ton/50,000 lb.	10 3/4" to 17"	6 1/4"	3 3/8"	—	3 5/16"-12	32.2	10,000	21"	4 3/4"	7"	55	Aluminum	—	—	—	2897T54	00000000
	30 ton/60,000 lb.	7 1/8" to 9 5/8"	2 1/2"	4 1/2"	1 1/4"	4 1/2"-12	18	10,000	25 5/8"	5 3/8"	5 3/4"	45	Steel	—	—	—	2902T43	00000000
	55 ton/110,000 lb.	11 1/8" to 17 1/4"	6 1/8"	5"	—	5"-12	69	10,000	20 3/4"	5 3/4"	6 7/8"	134	Steel	No	2	5/16"	2897T77	00000000
	100 ton/200,000 lb.	5 5/8" to 7 5/8"	2"	6 1/2"	—	—	44.2	10,000	20 3/4"	5 3/4"	6 7/8"	134	Steel	No	2	5/16"	2897T78	00000000

Rams for Hydraulic Jacks


Style B	Style C

Style D

Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.

Styles B and C—Styles B and C rams lift or push material. Style B rams have a lower profile than Style C rams.

Style D—Style D rams lift or push material and have an unthreaded hole through the center that can be used to create a pulling action. Run a threaded rod through the bottom of the ram and fasten or weld the rod to the material you are trying to pull. Often used to free stuck parts.

Ram Collar Thread Size—Rams with collar threads are threaded at the top of the ram for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks)

													Mounting
Style	Cap.	Ht.	Max. Lift	Ram Oil Cap., cu. in.	Dia.	Lg.	Wd.	Ram Collar Thread Size	Ram Center Hole Dia.	Max. Pressure, psi	Pipe Size	Thread Type	Fasteners Included	No. of Holes	Hole Dia.		Each
B	5 ton/10,000 lb.	1 3/8" to 1 5/8"	1/4"	0.2	—	2 9/16"	1 3/4"	—	—	10,000	3/8	NPTF	No	2	3/16"	2921T11	0000000
B	5 ton/10,000 lb.	1 3/4" to 2 1/4"	1/2"	0.6	—	2 9/16"	1 3/4"	—	—	10,000	3/8	NPTF	No	2	3/16"	2921T2	000000
B	10 ton/20,000 lb.	1 3/4" to 2 1/4"	1/2"	0.9	—	3 1/4"	2 3/16"	—	—	10,000	3/8	NPTF	No	2	1/4"	2921T12	000000
B	20 ton/40,000 lb.	2 1/8" to 2 5/8"	1/2"	2	—	4"	3"	—	—	10,000	3/8	NPTF	No	2	3/8"	2921T4	000000
B	30 ton/60,000 lb.	2 1/4" to 2 3/4"	1/2"	3.2	—	4 1/2"	3 3/4"	—	—	10,000	3/8	NPTF	No	2	3/8"	2921T14	00000000
B	50 ton/100,000 lb.	2 5/8" to 3 1/8"	1/2"	6.9	—	5 1/2"	5"	—	—	10,000	3/8	NPTF	No	2	1/2"	2921T15	00000000
C	5 ton/10,000 lb.	4 3/8" to 5 1/2"	1 1/8"	0.9	1 1/2"	—	—	1 1/2"-16	—	10,000	3/8	NPTF	No	2	1/4"	2990T8	000000
C	5 ton/10,000 lb.	6 5/8" to 9 3/4"	3 1/8"	2.9	1 1/2"	—	—	1 1/2"-16	—	10,000	3/8	NPTF	No	2	1/4"	2990T87	000000
C	5 ton/10,000 lb.	8 1/2" to 13 5/8"	5 1/8"	5	1 1/2"	—	—	1 1/2"-16	—	10,000	3/8	NPTF	No	2	1/4"	2990T12	000000
C	5 ton/10,000 lb.	10 3/4" to 17 7/8"	7 1/8"	7	1 1/2"	—	—	1 1/2"-16	—	10,000	3/8	NPTF	No	2	1/4"	2990T13	000000
C	5 ton/10,000 lb.	12 7/8" to 22"	9 1/8"	9.1	1 1/2"	—	—	1 1/2"-16	—	10,000	3/8	NPTF	No	2	1/4"	2990T11	000000
C	10 ton/20,000 lb.	4 7/8" to 7"	2 1/8"	4.1	2 1/4"	—	—	2 1/4"-14	—	10,000	3/8	NPTF	No	2	5/16"	2990T17	000000
C	10 ton/20,000 lb.	9 3/4" to 15 3/4"	6"	13.7	2 1/4"	—	—	2 1/4"-14	—	10,000	3/8	NPTF	No	2	5/16"	2990T18	000000
C	10 ton/20,000 lb.	13 3/4" to 23 3/4"	10"	22.7	2 1/4"	—	—	2 1/4"-14	—	10,000	3/8	NPTF	No	2	5/16"	2990T21	000000
C	15 ton/30,000 lb.	10 3/4" to 17 1/8"	6 3/8"	19	2 3/4"	—	—	2 3/4"-16	—	10,000	3/8	NPTF	No	2	3/8"	2990T24	000000
C	25 ton/50,000 lb.	10 3/4" to 16 7/8"	6 1/8"	32.2	3 1/2"	—	—	3 5/16"-12	—	10,000	3/8	NPTF	No	2	1/2"	2990T27	000000
C	25 ton/50,000 lb.	18 3/4" to 32 7/8"	14 1/8"	73.4	3 1/2"	—	—	3 5/16"-12	—	10,000	3/8	NPTF	No	2	1/2"	2990T28	00000000
C	30 ton/60,000 lb.	15 1/4" to 23 1/2"	8 1/4"	53.6	4"	—	—	3 5/16"-12	—	10,000	3/8	NPTF	—	—	—	2990T2	00000000
C	55 ton/110,000 lb.	11 1/8" to 17 1/4"	6 1/8"	69	5"	—	—	5"-12	—	10,000	3/8	NPTF	No	2	1/2"	2990T32	00000000
C	100 ton/200,000 lb.	14 1/8" to 20 3/4"	6 5/8"	137	7"	—	—	6 7/8"-12	—	10,000	3/8	NPTF	No	2	3/4"	2990T4	00000000
D	12 ton/24,000 lb.	7 1/4" to 10 1/4"	3"	8.3	2 3/4"	—	—	2 3/4"-16	3/4"	10,000	3/8	NPTF	No	2	5/16"	2990T34	00000000
D	20 ton/40,000 lb.	6 1/2" to 8 1/2"	2"	9.4	3 7/8"	—	—	3 7/8"-12	1"	10,000	3/8	NPTF	No	2	3/8"	2990T64	00000000
D	30 ton/60,000 lb.	7 1/8" to 9 5/8"	2 1/2"	18	4 1/2"	—	—	4 1/2"-12	1 1/4"	10,000	3/8	NPTF	No	2	3/8"	2990T65	00000000
D	30 ton/60,000 lb.	13" to 19 1/8"	6 1/8"	44.2	4 1/2"	—	—	4 1/2"-12	1 1/4"	10,000	3/8	NPTF	No	2	3/8"	2990T66	00000000
D	60 ton/120,000 lb.	9 3/4" to 12 3/4"	3"	38.2	6 1/4"	—	—	6 1/4"-12	2 1/8"	10,000	3/8	NPTF	No	2	1/2"	2990T67	00000000

Foot-Operated Tall-Body Hydraulic Bottle Jacks

Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.

Warning: Never use to support people or loads over people.

				Base			Mounting
Weight Capacity	Ht.	Max. Lift	Ram OD	Lg.	Wd.	Body Material	Fasteners Included	No. of Holes	Hole Lg.	Hole Wd.		Each



	1 ton/2,000 lb.	26" to 45"	19"	13/16"	3/4"	4 1/4"	Steel	No	2	5/8"	5/16"	2831T63	0000000


	1 ton/2,000 lb.	32" to 57"	25"	13/16"	3/4"	4 1/4"	Steel	No	2	5/8"	5/16"	2831T66	000000
	1 ton/2,000 lb.	38" to 69"	31"	13/16"	3/4"	4 1/4"	Steel	No	2	5/8"	5/16"	2831T69	000000

Hand-Operated Tall-Body Hydraulic Bottle Jacks

Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.

Warning: Never use to support people or loads over people.

				Base				Mounting
Weight Capacity	Ht.	Max. Lift	Ram OD	Lg.	Wd.	Handle Lg.	Body Material	Fasteners Included	No. of Holes	Hole Dia.	Features		Each



	1 1/2 ton/3,000 lb.	25 5/8" to 43 5/8"	18"	7/8"	5 7/8"	4 1/2"	20"	Steel	—	—	—	Removable Handle	2923T35	0000000


	3 ton/6,000 lb.	20 3/8" to 35 1/2"	15 1/8"	1 3/16"	5 7/8"	4 3/8"	20"	Steel	No	2	5/16"	Removable Handle	2923T45	000000
	5 ton/10,000 lb.	20 1/8" to 36 5/8"	16 1/2"	1 3/8"	6 1/4"	4 5/8"	20"	Steel	No	2	3/8"	Removable Handle	2923T55	000000
	8 ton/16,000 lb.	30 13/16" to 53 13/16"	23"	1 5/8"	6 1/2"	5 1/8"	20"	Steel	—	—	—	Removable Handle	2923T65	000000

Leveling Jacks with Wheel


Style A	Style B	Style C	Style D

Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.

Warning: Never use to support people or loads over people.

Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.

Side Mount—Slide the frame of your equipment through the mounting plate.

Locking Pin—Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.

						For Frame					Mounting				Mounting Plate
	Style	Weight Capacity	Ht.	Max. Lift	Overall Ht.	Ht.	Dp.	Handle Lg.	Body Material	For Hole Dia.	Fasteners Included	No. of Holes	Hole Lg.	Hole Wd.	Lg.	Wd.	Wheel Material		Each
Clamp On Side Mount



		A	1/4 ton/750 lb.	7 1/2" to 23 1/2"	16"	27 7/8"	0" to 5"	1 7/8" to 2 7/8"	5 1/2"	Steel	—	Yes	—	—	—	—	—	Plastic	2958T6	0000000


		B	1/2 ton/1,000 lb.	10 13/16" to 25 1/2"	14 11/16"	33 7/8"	3" to 5"	2" to 3"	6 1/8"	Steel	—	Yes	—	—	—	—	—	Plastic	8792T31	000000


		Clamp On Side Mount with Locking Pin



				C	1/2 ton/1,200 lb.	12 1/2" to 22 1/2"	10"	28 1/8"	2" to 4"	1 1/2" to 3"	6"	Steel	—	Yes	—	—	—	—	—	Plastic	8792T44	000000


				C	3/4 ton/1,500 lb.	12 7/8" to 22 7/8"	10"	31 5/8"	3" to 5"	2" to 3"	6 1/8"	Steel	—	Yes	—	—	—	—	—	Plastic	8792T32	000000


				Bolt On/Through-Hole Mount



						D	1/2 ton/1,200 lb.	8 5/8" to 21 1/2"	12 7/8"	35 5/8"	—	—	6 1/2"	Steel	2 1/4"	No	3	7/16"	13/16"	5 1/8"	4 1/4"	Plastic	2933T62	000000

Ratchet Jacks

These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.

Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.

Warning: Never use to support people or loads over people.

				Toe		Base					Mounting
Weight Capacity	Max. Clamping Force, lbf	Ht.	Max. Lift	Lg.	Wd.	Lg.	Wd.	Handle Lg.	Handle Material	Body Material	Fasteners Included	No. of Holes	Hole Dia.		Each



	1 1/4 ton/150 lb. to 2,500 lb.	750	4 1/2" to 49 3/4"	45 1/4"	4 1/2"	1 3/8"	7"	4"	32"	Steel	Iron	No	12	1/2"	2925T7	0000000


	2 1/4 ton/150 lb. to 4,500 lb.	750	4 1/2" to 38 5/8"	34 1/8"	4 1/2"	1 3/8"	7"	4"	32"	Steel	Iron	No	12	1/2"	2925T6	000000

Scaffold Leveling Jacks

Swap these jacks with the base plates on your scaffold to create a level foundation on uneven ground. They adjust in increments less than an inch, so you can set each leg of your scaffold to the exact height you need. Made from galvanized steel, these jacks resist rust and hold up to outdoor use. For safety and stability, the top 6" of the threaded stud slides into the scaffold frame and isn’t usable.

Note: Leveling jacks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Hollow—Hollow jacks are lighter in weight than solid jacks, so they’re easier to handle.

			Overall		Base				Thread		Base Mount
	Wt. Cap., lb.	Max. Lift	Ht.	Wd.	Lg.	Wd.	For ID	Material	Size	Lg.	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Wt., lb.	Specs. Met		Each
Hollow



		5,300	18"	24"	9 3/8"	5 5/16"	5 5/16"	1 1/2"	Galvanized Steel	1 3/8"-4	16 9/16"	No	4	1/2"	3 5/16"	6	Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.451	7819N11	000000


		Solid



				15,500	18"	24"	9 3/8"	5 5/16"	5 5/16"	1 1/2"	Galvanized Steel	1 3/8"-4	16 9/16"	No	4	1/2"	3 5/16"	11	Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.451	7819N12	00000