Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Design a latching system that fastens doors at multiple points—for extra security, these L-handle latches have a spot for a padlock. The L-handle latch acts as your base. Then add the included cam latch adapter to connect to additional latch points. For each new latch point, you need an inline or 90° cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door. These L-handle latches come with multiple cams, so you can change their fixed latching distance.

Inline cam latches come with multiple cams to accommodate different latching distances.

Inline roller cam latches rotate more smoothly than standard inline cam latches, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from paint or metal chips. Good for jobs when precise distances are unknown, they have an adjustable latching distance. Adjust the position of the cam before installing.

90° redirect cam latches mount to corners, so you can add latch points to the top or bottom of your door. To accommodate different latching distances, they come with multiple cams.

Rods connect latches to each other. Cut them to the length you need.

Rod adapters connect rods to latches. You need one for each rod end.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod, two bushings, and two rod guides.

For technical drawings and 3-D models, click on a part number.

Turn your existing quarter-turn cam locks or latches into a latching system that securely fastens doors at multiple points. Start by connecting a cam latch adapter to your lock or latch to create additional latch points. Then, add a cam latch, two rod adapters, and a rod for each latch point you’ll need. All cam latches weld to the inside of your enclosure door.

Inline cam latches come with multiple cams, so you can change their fixed latching distance.

Inline roller cam latches rotate more smoothly than standard inline cam latches, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage items in your enclosures. It also compresses a bit to help minimize rattling from vibration. Good for jobs when precise distances are unknown, these latches have an adjustable latching distance. Adjust the position of the cam before installing.

Use 90° redirect cam latches on the inside corners of your door to redirect your multi-point latching system 90° and add additional points along other edges of the door. They come with multiple cams, so you can change their fixed latching distance.

Rod adapters connect rods to latches. You need one for each rod end. Rods connect latches to each other. Cut them to the length you need.

For technical drawings and 3-D models, click on a part number.