McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Economy Needle File Sets

    These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
    6 Pieces—5 1/2" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 6 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .

    Straight Rectangle

    Tapered Rectangle

    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.

    Triangle

    Square

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A5200000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A530000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A540000
    6 Pieces—6 1/4" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 6 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .

    Straight Rectangle

    Tapered Rectangle

    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.

    Triangle

    Square

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A5500000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A560000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Steel, Iron8174A570000
    12 Pieces—5 1/2" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Economy Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Economy Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Economy Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A41000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4200000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A5100000
    12 Pieces—6 1/4" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Economy Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Economy Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Economy Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A45000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4600000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4700000

    Needle File Sets

    The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.
    6 Piece Sets with Rubber-Coated Plastic Handle
    Image of Product. Top orientation. Files. Needle File Sets, 6 Piece Sets with Rubber-Coated Plastic Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .

    Straight Rectangle

    Tapered Rectangle

    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.

    Triangle

    Square

    Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth
    Style
    Container
    Type
    For Use On
    Each
    5 1/2" Long
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Double CutPlastic CaseSteel, Iron4261A13000000
     
    12 Piece Sets without Handle
    Image of Product. Front orientation. Files. Needle File Sets, 12 Piece Sets without Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    Files without handles have a tang, so you can choose your own handle.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth
    Style
    Container
    Type
    For Use On
    Each
    4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A110000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A12000000
     
    5 1/2" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A16000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A17000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A18000000
     
    6 1/4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A22000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A23000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A24000000
    6One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A25000000
     
    12 Piece Sets with Rubber-Coated Plastic Handle
    Image of Product. Top orientation. Files. Needle File Sets, 12 Piece Sets with Rubber-Coated Plastic Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    Single-Cut Face—Single-cut files are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth Style
    Container Type
    For Use On
    Each
    5 1/2" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A140000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.
    One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A15000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.
    One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A21000000
     
    6 1/4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A311000000
    2One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A312000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A313000000
     

    Carbide Needle File Sets

    Image of Product. Front orientation. Files. Carbide Needle File Sets.
    Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
    6 Pieces—5 1/2" Long
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Carbide Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Round. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Triangle. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Carbide Needle File Sets, Taper File.

    Rectangle

    Round

    Triangle

    Square

    Knife

    Includes
    File Shape
    For Use On
    Each
    One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick.
    One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia.
    One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick.
    One Plastic Handle    		Straight Rectangle
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife    		Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A16000000
    6 Pieces—7 1/8" Long
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Carbide Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Round. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Triangle. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Carbide Needle File Sets, Taper File.

    Rectangle

    Round

    Triangle

    Square

    Knife

    Includes
    File Shape
    For Use On
    Each
    One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick.
    One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia.
    One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick.
    One Plastic Handle    		Straight Rectangle
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife    		Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A26000000

    Needle File Sets for Stainless Steel

    Image of Product. Front orientation. Files. Needle File Sets for Stainless Steel.
    Keep different shapes of needle files on hand to remove material from stainless steel. The files in these sets almost never clog. Their small tip is ideal for work in slots, grooves, and other tight spots on intricate parts. With a Swiss cut pattern, they’ll leave a consistent finish—they’re made to more exact measurements than files with an American cut pattern. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. All files resist corrosion.
    The files in these sets do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    6 Pieces—3 1/2" Long
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Needle File Sets for Stainless Steel, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets for Stainless Steel, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets for Stainless Steel, Taper File.

    Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets for Stainless Steel, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets for Stainless Steel, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Needle File Sets for Stainless Steel, Taper File.

    Triangle

    Square

    Barrette

    File Cut
    No.
    Includes
    File Shape
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.    		Straight Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Barrette    		8071N101000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.    		Straight Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Barrette    		8071N10200000

    Bend-and-Stay Needle File Sets

    Image of Product. Front orientation. Files. Bend-and-Stay Needle File Sets.
    Image of Product. Front orientation. ZoomedIn view. Files. Bend-and-Stay Needle File Sets.
    Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    6 Piece Set
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Bend-and-Stay Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Bend-and-Stay Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Bend-and-Stay Needle File Sets, Taper File.

    Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Bend-and-Stay Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Bend-and-Stay Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Bend-and-Stay Needle File Sets, Taper File.

    Triangle

    Square

    Barrette

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    2One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick.
    One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick.
    One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia.
    One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd.
    One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd.
    One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick.    		Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Barrette    		Steel, Iron8178A310000000
    back to top