How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Extreme-Pressure Stainless Steel Threaded Pipe Fittings
With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines. 316 stainless steel fittings have excellent corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads. BSPP and metric male threads have either a gasket or a gasket and washer to prevent leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads; the male threads have a gasket to prevent leaks.
For technical drawings and 3-D models, click on a part number.


Male Threads with
Gasket and Washer

(SAE Straight) Male
Threads with Gasket
- For Use With: See table
- Specifications Met: See table
316 Stainless Steel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size (A) | Thread Size (A) | Dash Size (A) | Pipe Size (B) | Thread Size (B) | Dash Size (B) | Max. Pressure | Max. Steam Pressure | For Use With | Specifications Met | Each | |
NPTF Male × UN/UNF (SAE Straight) Male | |||||||||||
1/8 | __ | 02 | __ | 7/16"-20 | 04 | 6,000 psi @ 72° F | 6,000 psi @ 200° F | Hydraulic Fluid, Oil, Steam, Water | SAE J514 | 000000000 | 000000 |
UN/UNF (SAE Straight) Male × BSPP Male | |||||||||||
__ | 7/16"-20 | 04 | 1/4 | __ | 04 | 5,000 psi @ 72° F | __ | Hydraulic Fluid, Oil, Water | ISO 1179, ISO 8434-6, SAE J1926 | 00000000 | 00000 |
__ | 7/16"-20 | 04 | 3/8 | __ | 06 | 5,000 psi @ 72° F | __ | Hydraulic Fluid, Oil, Water | ISO 1179, ISO 8434-6, SAE J1926 | 00000000 | 00000 |
Miniature Medium-Pressure Stainless Steel Threaded Pipe Fittings
When space is at a premium choose these compact fittings. Though small in size, they have the strength to handle medium-pressure applications. Fittings are stainless steel for very good corrosion resistance.
Metric, BSPP, and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. Made from fluoroelastomer, these gaskets resist chemicals, including benzene, butyl alcohol, and ethylene glycol. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.


UN/UNF (SAE Straight)
Male Threads with Gasket
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: ASTM A314, ASTM A320, ASTM A582
Compact Extreme-Pressure Steel Threaded Pipe Fittings
These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces. They are galvanized steel, which has fair corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads. BSPP and metric male threads have either a gasket, or a gasket and washer, to prevent leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads; the male threads have either a gasket or a gasket and washer to prevent leaks.
For technical drawings and 3-D models, click on a part number.


(SAE Straight) Male
Threads with Gasket
- For Use With: See table
- Specifications Met:
NPTF and UN/UNF (SAE Straight): ASTM A108
BSPP: ISO 1179, ISO 8434-6
BSPT: DIN EN 10226-1, ISO 7-1
Thread Size | Dash Size | Max. Pressure | For Use With | Each | |
UN/UNF (SAE Straight) Male | |||||
---|---|---|---|---|---|
7/16"-20 | 04 | 6,000 psi @ 72° F | Air, Hydraulic Fluid, Water | 000000000 | 00000 |


(SAE Straight) Male
Threads with Gasket and Washer

(SAE Straight) Male
Threads with Gasket
- For Use With: See table
- Specifications Met: See table
Pipe Size (A) | Thread Size (A) | Dash Size (A) | Pipe Size (B) | Thread Size (B) | Dash Size (B) | Max. Pressure | For Use With | Specifications Met | Each | |
NPTF Male × UN/UNF (SAE Straight) Male | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/8 | __ | 02 | __ | 7/16"-20 | 04 | 6,000 psi @ 72° F | Air, Hydraulic Fluid, Water | ASTM A108 | 000000000 | 00000 |
1/4 | __ | 04 | __ | 7/16"-20 | 04 | 6,000 psi @ 72° F | Air, Hydraulic Fluid, Water | ASTM A108 | 000000000 | 0000 |
UN/UNF (SAE Straight) Male × BSPP Male | ||||||||||
__ | 7/16"-20 | 04 | 1/4 | __ | 04 | 6,000 psi @ 72° F | Air, Hydraulic Fluid, Oil, Water | ISO 1179, ISO 11926, ISO 8434-6, SAE J1926 | 00000000 | 0000 |
__ | 7/16"-20 | 04 | 3/8 | __ | 06 | 6,000 psi @ 72° F | Air, Hydraulic Fluid, Oil, Water | ISO 1179, ISO 11926, ISO 8434-6, SAE J1926 | 00000000 | 0000 |
Miniature Medium-Pressure Aluminum Threaded Pipe Fittings
Their small size makes these miniature fittings a good choice for cramped, confined spaces. They are designed to handle medium-pressure applications. Fittings are aluminum, which is lightweight with good corrosion resistance.
Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Fittings with a threaded end are also known as hose nipples.
Fittings with a 45° flared end are also known as refrigeration and SAE fittings.
For technical drawings and 3-D models, click on a part number.

- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" Hose ID: Use Band-and-Buckle Clamps
- Specifications Met: SAE J476
Metal Push-On Barbed Hose Fittings for Air and Water
Fittings have sharper barbs than standard barbed hose fittings to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. They have good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance, so they’re the best choice for high-humidity environments.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a flared end meet JIC or SAE standards for dimensions. Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings. Fittings with a 45° flared end are also known as refrigeration and SAE fittings. Fittings with a female 37° and 45° flared end have a dual-angle seat that accepts both 37° and 45° flared fittings.
The optional installation tool (sold separately) allows you to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut the hose without fraying. Next, lubricate either the push-on hose, fitting or both. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.

Mounting Hole | ||||||||
---|---|---|---|---|---|---|---|---|
For Hose ID Range | Lg. | Ht. | Dp. | Dia. | No. of | Mounting Fasteners Included | Each | |
1/4" to 3/4" | 13 1/2" | 7" | 2 3/8" | 7/16" | 4 | No | 00000000 | 0000000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.

- Maximum Pressure: See table
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 155° F
- For Hose Manufacturer Series: Parker 801
- Specifications Met: SAE J514
Screw-On Hose Fittings for Hydraulic Fluid

These two-piece fittings screw directly onto rubber hose without the need for a separate adapter. To install, separate the two pieces of the fitting (the hose-end portion and the nipple portion). Screw the hose-end portion of the fitting onto the hose, then thread the nipple portion of the fitting into the hose-end portion. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
Zinc-plated steel fittings offer better strength and durability than 316 stainless steel fittings. They have fair corrosion resistance. Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings. They swivel 360° until tightened for easy installation.
Notes: Fittings are only for use with hydraulic hose.
For technical drawings and 3-D models, click on a part number.

- Maximum Pressure: See table
- Temperature Range: -40° to 212° F
- For Hose Manufacturer Series:
Parker 42 Series Fittings: Parker 422 SAE J517 100R1AT
Parker 30 Series Fittings: Parker 302 SAE J517 100R2AT - Specifications Met: See table
International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Hydraulic Fluid



Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close against each other, reducing fluid loss when connecting and disconnecting the line. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them when you need frequent access to a line. All of the International Standard ISO Minimal-Spill quick-disconnect plugs are compatible with any of the International Standard ISO Minimal-Spill quick-disconnect sockets of the same coupling size, regardless of the pipe size. Couplings are compatible with ISO 16028 Parker FEM, ISO 16028 Perfecting HT, and ISO 16028 Snap-Tite 74 couplings. Also known as double shut-off couplings, the plugs and sockets both have a shut-off valve that stops the flow when the coupling is separated. They are zinc-plated steel, which has excellent strength and durability and fair corrosion resistance.
Plugs are also known as nipples.
Sockets are push-to-connect style. To connect, push the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size. Pressure ratings are given for static (constant) pressure conditions.
Warning: Never attempt to connect or disconnect couplings when operating at maximum pressure. Stop the flow before you disconnect the line.
For technical drawings and 3-D models, click on a part number.

- Maximum Pressure: See table
- Temperature Range: -20° to 212° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028

- Maximum Pressure: See table
- Temperature Range: -20° to 212° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
45° Flared Fittings for Copper and Brass Tubing

- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.

- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 1/8" and 1" tube OD are not for use with fuel oil
- Specifications Met: See table
For Tube | |||||||
---|---|---|---|---|---|---|---|
OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Specifications Met | Each | |
NPTF Threads | |||||||
1/4" | 0.03" | 1/8 | Brass | 1,400 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 00000 |
1/4" | 0.03" | 1/4 | Brass | 1,400 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 0000 |
1/4" | 0.03" | 3/8 | Brass | 1,400 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 0000 |
1/4" | 0.03" | 1/2 | Brass | 1,400 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 00000 |




- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
For Tube | |||||||
---|---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Lg. | Each | ||
Short Nuts | |||||||
A | 1/4" | 0.049" | Brass | 1,400 psi @ 72° F | 3/4" | 000000000 | 00000 |
B | 1/4" | 0.03" | Brass | 1,400 psi @ 72° F | 5/8" | 00000000 | 0000 |
B | 1/4" | 0.03" | Brass | 1,400 psi @ 72° F | 23/32" | 000000000 | 00000 |
Long Nuts | |||||||
A | 1/4" | 0.049" | Brass | 1,400 psi @ 72° F | 15/16" | 000000000 | 0000 |
B | 1/4" | 0.03" | Brass | 1,400 psi @ 72° F | 15/16" | 000000000 | 00000 |
37° Flared Fittings for Copper Tubing

- For Use With: Air, Fuel Oil, Mineral Oil, Water
- Temperature Range: -40° to 400° F
- Tubing: Use with seamless copper
- Specifications Met: ISO 8434, MIL-F-18866, SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They can handle higher pressures than 45° flared fittings. Fittings are brass for good corrosion resistance. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.
37° Flared Fittings for Stainless Steel Tubing

- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
BSPP threads and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.

- For Use With: See table
- Temperature Range: See table
For Tube OD | Pipe Size | Thread Size | For Use With | Material | Gasket Material | Max. Pressure | Temp. Range, ° F | Each | |
NPT Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/4" | 1/8 | __ | Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water | 316 Stainless Steel | __ | 6,000 psi @ 72° F | -420 to 1200° | 000000000 | 00000 |
1/4" | 1/4 | __ | Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water | 316 Stainless Steel | __ | 6,000 psi @ 72° F | -420 to 1200° | 000000000 | 00000 |
BSPP Threads | |||||||||
1/4" | 1/8 | __ | Air, Hydraulic Fluid, Water | 316 Stainless Steel | Fluoroelastomer Rubber | 6,000 psi @ 72° F | -15 to 400° | 0000000 | 00000 |
1/4" | 1/4 | __ | Air, Hydraulic Fluid, Water | 316 Stainless Steel | Fluoroelastomer Rubber | 6,000 psi @ 72° F | -15 to 400° | 0000000 | 00000 |
BSPT Threads | |||||||||
1/4" | 1/8 | __ | Air, Hydraulic Fluid, Natural Gas, Water | 316 Stainless Steel | __ | 8,000 psi @ 72° F | -420 to 1200° | 0000000 | 00000 |
1/4" | 1/4 | __ | Air, Hydraulic Fluid, Natural Gas, Water | 316 Stainless Steel | __ | 8,000 psi @ 72° F | -420 to 1200° | 0000000 | 00000 |
UN/UNF (SAE Straight) Threads | |||||||||
1/4" | __ | 7/16"-20 | Air, Hydraulic Fluid, Isopropyl Alcohol, Water | 316 Stainless Steel | Fluoroelastomer Rubber | 6,000 psi @ 72° F | -15 to 400° | 000000000 | 00000 |
1/4" | __ | 9/16"-18 | Air, Hydraulic Fluid, Isopropyl Alcohol, Water | 316 Stainless Steel | Buna-N Rubber | 6,000 psi @ 72° F | -30 to 250° | 000000000 | 00000 |
1/4" | __ | 9/16"-18 | Air, Hydraulic Fluid, Isopropyl Alcohol, Water | 316 Stainless Steel | Fluoroelastomer Rubber | 6,000 psi @ 72° F | -15 to 400° | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Nut Material | Each | |
1/4" | 316 Stainless Steel | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
Cleaned and Bagged 37° Flared Fittings for Stainless Steel Tubing

- For Use With:
NPT Threads: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
UN/UNF (SAE Straight) Threads: Air, Isopropyl Alcohol, Water - Temperature Range:
NPT Threads: -420° to 1200° F
UN/UNF (SAE Straight) Threads: -15° to 400° F - Tubing: Use with seamless or welded 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: SAE J514, ISO 8434
Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness. Also known as JIC (Joint Industrial Council) fittings, they provide a tight metal-to-metal seal on tubing that is flared to 37°. They are 316 stainless steel for excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately and are not cleaned and bagged.
UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. They are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.


(SAE Straight) Male
Threads with Gasket
For Tube OD | Pipe Size | Thread Size | Material | Gasket Material | Max. Pessure | Each | |
NPT Threads | |||||||
---|---|---|---|---|---|---|---|
1/4" | 1/8 | __ | 316 Stainless Steel | __ | 6,000 psi @ 72° F | 000000000 | 000000 |
1/4" | 1/4 | __ | 316 Stainless Steel | __ | 6,000 psi @ 72° F | 000000000 | 00000 |
UN/UNF (SAE Straight) Threads | |||||||
1/4" | __ | 7/16"-20 | 316 Stainless Steel | Fluoroelastomer Rubber | 6,000 psi @ 72° F | 000000000 | 00000 |

For Tube OD | Pipe Size | Material | Max. Pessure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/4 | 316 Stainless Steel | 6,000 psi @ 72° F | 000000000 | 000000 |

For Tube OD | Nut Material | Each | |
1/4" | 316 Stainless Steel | 000000000 | 00000 |

For Tube OD | Sleeve Material | Each | |
1/4" | 316 Stainless Steel | 000000000 | 00000 |
Precision AN 37° Flared Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.

For Tube OD | Pipe Size | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel | |||||
---|---|---|---|---|---|
ANPT Threads | |||||
1/4" | 1/8 | 3,000 psi @ 72° F | AN816-4J, ASTM A380, SAE AS4841 | 00000000 | 000000 |
1/4" | 1/4 | 3,000 psi @ 72° F | AN816-4-4J, ASTM A380, SAE AS4841 | 0000000 | 00000 |
1/4" | 1/2 | 3,000 psi @ 72° F | ASTM A380, SAE AS4841, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |
316 Stainless Steel | |||||
ANPT Threads | |||||
1/4" | 1/8 | 3,000 psi @ 72° F | AN816-4K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
1/4" | 1/4 | 3,000 psi @ 72° F | AN816-4-4K, ASTM A380, SAE AS4841 | 00000000 | 00000 |
1/4" | 1/2 | 3,000 psi @ 72° F | ASTM A380, SAE AS4841, SAE AS9100D, SAE AS9104/1 | 00000000 | 00000 |
Vibration-Resistant Precision AN 37° Flared Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 500° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications. The threads on the tube end are Class 3A and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings are 316 stainless steel for excellent corrosion resistance. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.


For Tube OD | Pipe Size | Material | Max. Pressure | Specifications Met | Each | |
ANPT Threads | ||||||
---|---|---|---|---|---|---|
1/4" | 1/4 | 316 Stainless Steel | 3,000 psi @ 72° F | ASTM A380, SAE AS9104/1, AN816-4-4K, SAE AS9100D | 00000000 | 000000 |

For Tube OD | Nut Material | Max. Pressure | Specifications Met | Each | |
1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN818-4K, ASTM A380, SAE AS4841 | 00000000 | 00000 |

For Tube OD | Sleeve Material | Max. Pressure | Specifications Met | Each | |
1/4" | 316 Stainless Steel | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841 | 00000000 | 00000 |
37° Flared Fittings for Steel Tubing


Male Threads with
Gasket and Washer

Male Threads
with Gasket
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
To prevent leaks, UN/UNF (SAE Straight) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer.
For technical drawings and 3-D models, click on a part number.


Male Threads with
Gasket and Washer

Male Threads
with Gasket
- For Use With: See Table
- Temperature Range: See Table
For Tube OD | Pipe Size | Thread Size | Thread Pitch, mm | For Use With | Material | Gasket Material | Washer Material | Max. Pressure | Temp. Range, °F | Each | |
NPTF Threads | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/4" | 1/8 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | __ | __ | 5,000 psi @ 72° F | -60° to 400° | 000000000 | 00000 |
1/4" | 1/4 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | __ | __ | 5,000 psi @ 72° F | -60° to 400° | 000000000 | 0000 |
Metric Threads | |||||||||||
1/4" | __ | M10 | 1 | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | __ | 3,600 psi @ 72° F | -30° to 200° | 00000000 | 00000 |
1/4" | __ | M10 | 1 | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 0000 |
1/4" | __ | M12 | 1.5 | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | __ | 3,600 psi @ 72° F | -30° to 200° | 00000000 | 00000 |
1/4" | __ | M12 | 1.5 | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 00000 |
BSPP Threads | |||||||||||
1/4" | 1/8 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | __ | 4,000 psi @ 72° F | -30° to 200° | 00000000 | 00000 |
1/4" | 1/8 | __ | __ | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 0000 |
1/4" | 1/4 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | __ | 5,000 psi @ 72° F | -30° to 200° | 00000000 | 00000 |
1/4" | 1/4 | __ | __ | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 0000 |
1/4" | 3/8 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | Buna-N Rubber | __ | 4,000 psi @ 72° F | -30° to 200° | 00000000 | 00000 |
BSPT Threads | |||||||||||
1/4" | 1/8 | __ | __ | Air, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | __ | __ | 4,000 psi @ 72° F | -60° to 400° | 00000000 | 00000 |
1/4" | 1/8 | __ | __ | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | __ | __ | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 0000 |
1/4" | 1/4 | __ | __ | Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil | Zinc-Plated Steel | __ | __ | 4,500 psi @ 72° F | -20° to 212° | 00000000 | 0000 |

- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.

- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temperature Range: -60° to 400° F
For Tube OD | Nut Material | Max. Pressure | Each | |
1/4" | Zinc-Plated Steel | 4,500 psi @ 72° F | 000000000 | 00000 |
37° Flared Fittings for Aluminum Tubing

- For Use With: Air, Coolant, Gasoline, Hydraulic Fluid, Water
- Temperature Range: -60° to 400° F
- Tubing: Use with seamless aluminum
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings are aluminum, which is lightweight with good corrosion resistance. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
For technical drawings and 3-D models, click on a part number.

For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
1/4" | 1/4 | Anodized 2024 Aluminum | 3,000 psi @ 72° F | 0000000 | 00000 |

For Tube OD | Nut Material | Max. Pressure | Each | |
1/4" | Anodized 2024 Aluminum | 3,000 psi @ 72° F | 0000000 | 00000 |

For Tube OD | Sleeve Material | Max. Pressure | Each | |
1/4" | Anodized 2024 Aluminum | 3,000 psi @ 72° F | 0000000 | 00000 |
Push-to-Connect Fittings for Plastic Tubing—Food and Beverage

- Temperature Range: 35° to 140° F
- Tubing: See table
- Specifications Met:
White Polypropylene: NSF/ANSI 51, NSF/ANSI 61
Black Polypropylene: FDA Compliant 21 CFR 176.170, NSF/ANSI 58, NSF/ANSI 372
Acetal: NSF/ANSI 51, NSF/ANSI 61
Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect fittings with a release ring, push on the release ring and pull the tubing out of the fitting.
Acetal fittings resist moisture, so they won’t soften and lose strength in humid environments. They meet NSF/ANSI 51 for safe use with food and NSF/ANSI 61 for safe use with drinking water.
Black fittings have excellent UV resistance and are suitable for outdoor environments.
For technical drawings and 3-D models, click on a part number.