Made with moisture-resistant calcium sulfonate thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments. Its zinc alloy additive neutralizes acid and makes it a good replacement for leaded grease.

Grease lubricates most efficiently within the listed temperature range.

Send precise amounts of grease to multiple lubrication points at regular intervals, so each point will always have the grease it needs. These dispensers have a pump for each outlet, so they can send different amounts of grease to each lubrication point. It also means the lubrication points can be different distances from the dispenser. Because they’re motor driven, they’ll dispense correctly even if temperature changes affect the grease consistency. They’re also unaffected by back pressure. Unlike spring- and gas-driven dispensers, they don’t need to be mounted close to their lubrication points. To prevent over-lubrication when your machine is down, there’s a button to cut off the flow without uninstalling the dispenser. You can also integrate them into a system that’s controlled by a PLC and program them to only grease when your machine is running and not when it's down. This is useful for systems with intermittent downtime.

Use the digital display to input your flow settings. It also shows you the grease levels and the time until the dispenser empties, helping you plan for maintenance. Lights indicate the status of your dispenser, so you can see at a glance if it's operating. If it's not operating correctly, you'll see error and feedback messages on the display.

To match your lubrication point, use grease fitting adapters.

By releasing a precise amount of grease at regular intervals, these motor-driven dispensers make sure your machine always has the right amount of grease. They’ll dispense correctly even if temperature changes affect the grease consistency. They’re not impacted by back pressure either. And because they’re driven by a motor instead of gas or a spring, these dispensers don’t need to be mounted close to your lubrication point. To prevent over-lubrication when your machine is down, you can cut off the flow without uninstalling the dispenser.

Use the digital display to input your flow settings. It also shows you the grease levels and the time until the dispenser empties, helping you plan for maintenance. Lights indicate the status of your dispenser, so you can see at a glance if it's operating. If it's not operating correctly, you'll see error and feedback messages on the display.

Rated IP65, these dispensers seal out dust and water from washdowns.

Use grease fitting adapters to match your lubrication point.