We will reply to your message within an hour.
Plastic screws are chemical and oil resistant, nonconductive, and lightweight.
Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.
Nylon pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
Made from nylon, these metric pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
These metric PEEK screws are reliable in harsh environments up to 500° F and withstand acids, bases, and salt solutions. All are chemical and oil resistant, nonconductive, and lightweight.
Reliable in harsh environments up to 500° F, PEEK screws withstand acids, bases, and salt solutions. They are chemical and oil resistant, nonconductive, and lightweight.
Polycarbonate screws resist breaking in high-impact applications. All are chemical and oil resistant, nonconductive, and lightweight.
Made from polycarbonate, these metric pan head screws resist breaking in high-impact applications. They are chemical and oil resistant, nonconductive, and lightweight.
Nylon screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
Made from nylon, these metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F. They are nonconductive, lightweight, and resist wear due to their slippery surface.
These metric PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F. They are nonconductive, lightweight, and resist wear due to their slippery surface.
Made from nylon, these screws are chemical and oil resistant, nonconductive, and lightweight.
PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F.
Ceramic screws won't melt, rust, seize, or become brittle—even at extreme temperatures. They are nonconductive and highly resistant to corrosive gases.
Fiberglass screws are stronger than plastic screws, chemical and oil resistant, nonconductive, and lightweight.
These screws are chemical and oil resistant, nonconductive, and lightweight. The flange eliminates the need for a washer, distributing pressure where the screw meets the surface.
These screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.
Polycarbonate screws resist breaking in high impact applications better than other plastic screws. All are chemical and oil resistant, nonconductive, and lightweight.
These metric polycarbonate screws resist breaking in high-impact applications better than other plastic screws. All are chemical and oil resistant, nonconductive, and lightweight.
PTFE screws are more chemical resistant than other plastic screws and withstand temperatures from -100° F to 500° F.
These screws are more reliable in high-stress, high-temperature environments than other plastic screws. They withstand water, steam, and temperatures up to 500° F.
These steel screws are zinc plated to resist corrosion in wet environments.
Made from 18-8 stainless steel, these screws are chemical resistant.
Able to penetrate overlapping sheets, these screws have a secure hold in wood.
These steel screws are available with corrosion resistant finishes. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation.
These steel screws have a head encapsulated by 18-8 stainless steel.
Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.
The neoprene-backed washer seals out contaminants.
18-8 stainless steel screws have good chemical resistance.
Cutting wings under the head allow plastic to expand and contract without cracking. A washer made from aluminum and rubber bonded to steel adds a watertight seal.
These shoulder screws are chemical resistant, nonconductive, and lightweight.
These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.
Made from nylon, these set screws are lightweight, resist chemicals, and won’t carry an electric current.
Often used to secure gears and pulleys to shafts, these metric nylon set screws are lightweight and won’t carry an electrical current.
These chemical-resistant 18-8 stainless steel screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.
Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.
These alloy steel set screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them set screws on soft surfaces such as aluminum.
Available in metric sizes, these alloy steel set screws have an extra-soft nylon tip that minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.
A knurled head allows for slip-resistant controlled adjustment.
These metric thumb screws have a knurled head for a slip-resistant controlled adjustment.
A large head allows you to grip these screws with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.
These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.
Arms provide a flat surface to push your fingers against.
Tighten these thumb screws by hand or with a hex key for more torque.
Fine threads give you precise control.
A soft nylon tip conforms to textured surfaces and minimizes damage when holding items in place.
A raised head makes these thumb screws easy to grip. Made from nylon, they're chemical resistant, nonconductive, and lightweight.
Stronger than standard nylon, these thumb screws are chemical resistant, nonconductive, and lightweight. They have a raised head that makes them easy to grip.
These nylon thumb screws are chemical resistant, nonconductive, and lightweight.
A thin head allows these thumb screws to be used in low-clearance applications.
An unthreaded barrel allows quick assembly with a press or a hammer.
Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.
These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.
Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.
These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.
These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.
An expanding rubber bushing damps vibration while holding panels together.
Push the plunger to secure and pull to release for quick access.
Made from nylon 6/6, these threaded rods resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.
These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.
Fiberglass threaded rods are stronger than nylon threaded rods. They resist acids, solvents, salt water, and oil.
PTFE threaded rods withstand temperatures up to 250° F and resist oil, grease, detergents, and most mineral acids. They're the lowest friction plastic threaded rods we offer, so they thread on smoothly.
These acetal threaded rods won't absorb moisture like nylon and fiberglass rods, so they're good for use in wet environments. They resist alcohol, gasoline, and solvents.
PVC threaded rods resist acids, alkalies, salt solutions, and alcohol.
Position components in assemblies, as well as separate or connect parts with these standoffs.
Also known as mungo anchors, these have large fins that prevent rotation.
These anchors are also known as drive rivets. To install, hammer the pin into the body. Pry out the pin to remove.
These anchors are also known as drive rivets. To install, hammer the screw into the body. Unthread the screw to remove.
Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant.
High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.
These anchors fit a range of sheet metal and wood screw sizes since they form their own threads when installed.
Fins prevent these anchors from spinning during installation.
Easy to install, tap these anchors in like a nail—no drilled hole required.
Install these spring plungers with a screwdriver—they're slotted on one or both ends.
Lock the nose into the retracted position by pulling the knob and rotating it 90°.
Retract the nose by pulling the knob.
18-8 stainless steel has good corrosion resistance.
Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Mount these knobs into a threaded hole.
Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole.
Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.
Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.
Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.
To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Keep a convenient selection of knobs on hand. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Use these knobs to display important messages. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Mount these knobs into a threaded hole. Turn the knob to move the stud 0.005" per graduation and make precise adjustments.
To build a custom precise-control knob or thumb screw, pair one of these knobs with a socket head screw. Turn the knob to move the screw 0.005" per graduation and make precise adjustments.
Fasten these knobs directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.
Create custom threads to secure these handles to the front of your surface from the backside. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.
Also known as nut eyebolts, these are designed for through-hole applications.
Use these eyebolts for routing wire and for other light duty applications.
Add on to an existing screw conveyor or keep it running like new.
Screw and nut sets or nuts secure brackets and other accessories to rails.
A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.
Conceal and protect the tops of socket head or button head screws.
Sized to fit hex nuts, these caps snap on for a tight hold and provide protection from corrosion.
To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.
Fasten toilet bowls to the floor.
Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.