Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.

Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Use these hinges on lightweight screen and storm doors as well as small gates.

Tighten or loosen an adjustment screw to change the hinge resistance.

These hinges are made of metal.

Lock these hinges open at any angle within their range of motion.

Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.

Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.

Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide.

Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet.