A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

These nozzles have replaceable tips that are removable with a quarter-turn.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

These nozzles project their spray at a right angle from their threaded connection.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

These nozzles provide a uniform distribution of droplets.

These nozzles provide a uniform distribution of droplets.

With a unique spiral tip, these nozzles produce high flow rates and are clog-resistant.

These nozzles produce a flat, thin spray pattern.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

These nozzles produce a flat, thin spray pattern.

Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Certified by 3-A to meet sanitary design standards, these stationary nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

These flexible needles can be cut to length.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Use these guns to clean as well as apply chemicals and solvents.

Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature.