Gasoline Hose Nozzles
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Use hold-open clip kits to replace a broken clip. Install with pliers.
Nozzles | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Threaded Swivels | Replacement Hold-Open Clip Kits | |||||||||||||
| Max. Flow Rate, gpm | Pipe Size  | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 5433K29 | 0000000 | 5538K52 | 000000 | ______ | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | __ | 5433K32 | 000000 | ______ | 00 | 5433K13 | 000000 |
| Optional Red Splash Guard | 5433K31 | Each | 000000 |
Threaded Swivels for Hose Nozzles
To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.
Anodized aluminum swivels have good corrosion resistance and are lighter in weight than chrome-plated brass swivels. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.
Straight swivels rotate at the female connection point only. They are also known as inline swivels.
45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.
| Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | ||||||
|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||
| 1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 5509K51 | 0000000 |
| 1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 5509K52 | 000000 |
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 5509K53 | 000000 |
Chrome-Plated Brass | ||||||
| 1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 5509K71 | 000000 |
| 1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 5509K72 | 000000 |
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 5509K73 | 000000 |
| Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Gasket Material | Specifications Met | Each | |
For Use With Gasoline and Diesel Fuel | ||||||||
|---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||
| 3/4 × 3/4 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 1/8" | Buna-N Rubber | UL Listed | 5538K52 | 000000 |
| 1 × 1 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 3/4" | Buna-N Rubber | UL Listed | 5538K54 | 000000 |
Container | |||||
|---|---|---|---|---|---|
| Size, fl. oz. | Type | Max. Pressure for Fluids, psi | Temp. Range, °F | Each | |
For Use With Gasoline, Diesel Fuel, Hydraulic Oil, and Coolant | |||||
| 4 | Brush-Top Can | 10,000 | -100° to 600° | 5477K101 | 000000 |
Barbed Swivels for Hose Nozzles
Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely. They are also known as inline swivels. Swivels are anodized aluminum, which is lightweight with good corrosion resistance.
Anodized Aluminum | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | |||||||
| 1" | 1 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 2 13/16" | 5509K31 | 000000 |
| 1 1/4" | 1 1/4 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 3 7/8" | 5509K32 | 000000 |
| 1 1/2" | 1 1/2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/8" | 5509K33 | 000000 |
| 2" | 2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 11/16" | 5509K34 | 000000 |