These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

Quickly change spray angles by removing the nozzle and snapping on a new one.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

These nozzles project their spray at a right angle from their threaded connection.

These nozzles provide a uniform distribution of droplets.

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

These nozzles provide a uniform distribution of droplets.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.

These premium nozzles are engineered for the most efficient airflow consumption.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

Twist the barrel to adjust water flow.

Use the lever to turn water flow on and off.

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Provide a connection for hose cocks, needle valves, and nozzles by attaching these flanges and turrets to your supply pipe.