The jaws on these wrenches are shaped to turn slip nuts, jam nuts, and large hex nuts.

Also known as a basin wrench, this tool has a pivoting head and spring-close jaws for working in tight spaces where it’s difficult to adjust a traditional wrench.

Press the lever to lock the jaw and keep these wrenches clamped on your work, leaving your hands free.

The handle is covered in plastic for a comfortable grip.

An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.

These tools have the heavy duty handle and adjustment mechanism of a pipe wrench and the smooth jaws of a traditional adjustable wrench.

A plastic-covered handle provides a comfortable grip.

Reverse the movable jaw to convert from a smooth-jaw adjustable wrench to a serrated-jaw pipe wrench.

A ratchet mechanism in the head allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

The handles are covered in plastic for a comfortable grip.

These wrenches are made of stainless steel for excellent corrosion resistance.

An extra-long handle provides access to hard-to-reach fasteners and increases leverage.

Flip these wrenches over to ratchet in the opposite direction.

Pivot the box end for access to fasteners in tight spots.

Pivot the box end for access to fasteners in tight spots.

Flip these wrenches over to ratchet in the opposite direction.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

When working in tight spaces, these short wrenches fit where others can't.

Quickly find the wrenches you're looking for with these brightly colored sets.

Suitable for occasional maintenance work, these sets are imported.

No need to pull the socket off the tool—push a button to release.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

The 20° offset head provides clearance when reaching over obstructions.

Turn sockets from above when there's not room to swing a standard wrench handle.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Measure with an accuracy of ±7%.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Pivot the head to access fasteners in tight spots.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Use these tools for general shop applications.

Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.

Use these wrenches with impact sockets only.

Also known as half-moon and obstruction wrenches, the shape lets you reach around obstacles and into machinery.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The offset head gives you additional clearance to turn hard-to-reach fasteners.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.

The head is offset 45° to provide clearance for reaching over obstructions.

Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

In addition to a long handle, these wrenches include two heads with different hook widths.

These wrenches are made of stainless steel for excellent corrosion resistance.

Fit these wrenches into slots on the circumference of collars, bearings, and other machine tool components.

Made of stainless steel, these wrenches have excellent corrosion resistance.

The slim profile fits the flanges and nuts on the backing pads of portable sanders and grinders.

Reverse the pins when you need to fit different hole sizes on the face of collars, bearings, and other machine tool components.

Change out the pins to fit a different hole size.

The head pivots to accommodate a range of diameters.

These wrenches are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.