Irregularly shaped threads at the top of these locknuts grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

Nearly 10% wider and taller than standard steel-insert locknuts, these handle heavier loads by distributing them over a larger area. They also have the most secure hold of all the heavy-profile locknuts we offer. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure that they're even used to fasten components on roller coasters. These locknuts are also reusable, but their holding power decreases after the first use, so you should use a new nut for the strongest possible hold.

About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.