McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    Help me decide (beta)
    2 Products

    Locking Type

    Performance

    Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8 or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Small Pack
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    2"-4 1/2
    		3 9/64"2 13/32"SAE Grade 8
    		185197135A115000000
     

    Locknuts for use with Cotter Pins

    Image of ProductInUse. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Image of Product. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    For Cotter
    Pin Dia.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    2"-4 1/2
    		3"1 23/32"3/8"Material Certificate
    		195030A420000000
     
    back to top