M22 Locknuts | McMaster-Carr

Filter by

System of Measurement

Thread Pitch

Nut Type

Height

Width

Locking Type

Fastener Strength Grade/Class

Material

Hex Nut Profile

Thread Spacing

Finish

Zinc Yellow-Chromate Plated

Thread Type

Metric

Fastener Strength Rating

Face Style

Thread Direction

Specifications Met

Drive Style

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

Thread Fit

Performance

20 Products

Nylon-Insert Locknuts

Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

High-Strength Steel

Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.

Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M22 × 1.5 mm	32	22	Class 10	185	DIN 985, ISO 10511	1	94645A121	000000


	M22 × 2.5 mm	32	22	Class 10	185	DIN 985	1	94645A310	0000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	M22 × 2.5 mm	32	22	Class 8	185	DIN 985, ISO 10511	5	90576A823	000000


	Zinc-Plated Steel



			M22 × 1.5 mm	32	22	Class 8	185	DIN 985, ISO 10511	5	90576A299	00000


			M22 × 2.5 mm	32	22	Class 8	185	DIN 985, ISO 10511	5	90576A162	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M22 × 2.5 mm	32	22	185	10	90631A123	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M22 × 2.5 mm	32	22	185	DIN 985	1	93625A760	00000


	316 Stainless Steel



			M22 × 2.5 mm	32	22	185	DIN 985	1	94205A111	0000

Bearing Locknuts

Carbon Steel

With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place. They come as one piece, so you can easily clamp them onto your shaft or spindle. But, since they aren’t made entirely of metal, they don’t stand up to heat as well as all-metal locknuts. Slots in their sides mean you can tighten and loosen them with a spanner wrench or spanner socket. Their face is also chamfered to help keep the size and weight of your assembly at a minimum. All meet international standards for bearing locknut dimensions.

Zinc-Plated Carbon Steel—Zinc-plated carbon steel locknuts resist rusting from some moisture, but you shouldn’t use them with salt water or chemicals. They are strong and resist wear, though they don’t stand up to corrosion as well as 303 stainless steel locknuts.

Carbon Steel—All carbon steel locknuts are strong and resist wear, though they don’t stand up to corrosion as well as 303 stainless steel locknuts.

303 Stainless Steel—303 stainless steel locknuts resist corrosion better than carbon steel locknuts but aren’t as strong. They withstand washdowns and chemicals.

Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.

	Thread						Carbon Steel		Zinc-Plated Carbon Steel		303 Stainless Steel
	Size	Spacing	OD, mm	Wd., mm	Insert Max. Temp., ° F	Specs. Met		Each		Each		Each
Chamfered Face



		M22 × 1 mm	Extra Fine	34	10.5	160	ISO 2982-2	6343K36	000000	———	0	6343K98	000000


		M22 × 1 mm	Extra Fine	38	10	210	—	———	0	3552N28	000000	———	0
		M22 × 1.5 mm	Fine	38	12.5	210	—	———	0	3552N29	00000	———	0

Top-Lock Distorted-Thread Locknuts

Irregularly shaped threads at the top of these locknuts grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

High-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Phosphate-Coated Steel—The dark coating creates both a finished appearance and a barrier against rust that withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M22 × 1.5 mm	32	22	Class 10	5	99183A440	000000


	M22 × 2.5 mm	32	22	Class 10	5	99183A210	00000


	Black-Phosphate-Coated Steel



			M22 × 1.5 mm	33	22	Class 10	1	99183A690	0000


			M22 × 2.5 mm	33	22	Class 10	1	99183A710	0000

Steel-Insert Locknuts for Extreme Vibration

The most secure hold of all the locknuts we offer. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure that they're even used to fasten components on roller coasters. These locknuts are also reusable, but their holding power decreases after the first use, so you should use a new nut for the strongest possible hold.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class		Each
Steel



	M22 × 2.5 mm	32	20	Class 8	93520A217	000000

High-Profile Nylon-Insert Locknuts

Slightly taller than standard-profile locknuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M22 × 2.5 mm	32	25	Class 8	220	DIN 982, ISO 7040	1	97131A220	00000

Center-Lock Distorted-Thread Locknuts

Also known as reversible locknuts, these thread on from either side, so you don't have to worry about fastening them incorrectly and damaging your screw. The irregularly shaped threads in the middle grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M22 × 1.5 mm	32	18	Class 8	1	92048A330	000000

Flex-Top Locknuts for Heavy Vibration

The top section of these nuts expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. They’re often used in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm		Each
18-8 Stainless Steel



	M22 × 2.5 mm	32	28.6	94560A118	000000