McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    4 Products

    Nylon-Insert Locknuts

    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Medium-Strength Steel
    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M48 × 3 mm7548Class 8
    		185DIN 985, ISO 10511190576A726000000
    M48 × 5 mm7548Class 8
    		185DIN 985, ISO 10511190576A16600000
     

    Bearing Locknuts

    Image of System. Front orientation. Contains Annotated. Bearing Nuts. Bearing Locknuts.
    Image of Product. Carbon Steel. Front orientation. Bearing Nuts. Bearing Locknuts, Chamfered Face, Carbon Steel.

    Carbon Steel

    With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place. They come as one piece, so you can easily clamp them onto your shaft or spindle. But, since they aren’t made entirely of metal, they don’t stand up to heat as well as all-metal locknuts. Slots in their sides mean you can tighten and loosen them with a spanner wrench or spanner socket. Their face is also chamfered to help keep the size and weight of your assembly at a minimum. All meet international standards for bearing locknut dimensions.
    Zinc-Plated Carbon Steel—Zinc-plated carbon steel locknuts resist rusting from some moisture, but you shouldn’t use them with salt water or chemicals. They are strong and resist wear, though they don’t stand up to corrosion as well as 303 stainless steel locknuts.
    Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.
    Thread
    Zinc-Plated
    Carbon Steel
    Size
    Spacing
    OD,
    mm
    Wd.,
    mm
    Insert Max.
    Temp., ° F
    Each
    Chamfered Face
    M48 × 1.5 mmExtra Fine
    		6413.52103552N440000000
     

    Locknuts for use with Cotter Pins

    Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.
    Medium-Strength Steel
    Image of ProductInUse. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Image of Product. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    For Cotter
    Pin Dia., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Steel
    M48 × 5 mm7550Class 8
    		8DIN 935193760A124000000
     
    back to top