McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Compare
    Thread Direction
    Industrial Info Compare
    Thread Spacing
    Industrial Info Compare
    Thread Type
    Industrial Info Compare
    Fastener Strength Rating
    Length
    Attribute Image
    DFARS Specialty Metals
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Drive Style
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    53 Products
    About Hex Nuts
    industrial info icon

    Choose a hex nut with the right profile, material, and strength for your application.

    Hex Nuts

    The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.
    Medium-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Image of Specification. Front orientation. Hex Nuts. Hex Nuts.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 5
    		ASME B18.2.2195462A56500000
     
    Black-Oxide Steel
    1 1/2"-12
    		2 1/4"1 5/16"SAE Grade 5
    		ASME B18.2.2195479A90900000
     
    Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 5
    		ASME B18.2.2195505A6290000
     
    High-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Image of Specification. Front orientation. Hex Nuts. Hex Nuts.
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Zinc-Flake-Coated Steel—The most durable zinc coating, zinc flake is a multilayer finish that resists wear for long-term rust protection. Similar to zinc yellow-chromate, it won't hold up to harsh chemicals like stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 8
    		Material Certificate with Traceable Lot Number
    		194895A865000000
     
    Black-Oxide Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 8
    		—194895A73000000
     
    Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 8
    		Material Certificate with Traceable Lot Number
    		190499A8650000
     
    Zinc-Flake-Coated Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 8
    		—193827A2990000
     
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Image of Specification. Front orientation. Hex Nuts. Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 2
    		ASME B18.2.2190473A26500000
     
    Steel
    1 1/2"-12
    		2 1/4"1 9/32"SAE Grade 2
    		ASME B18.2.2190490A2650000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Image of Specification. Front orientation. Hex Nuts. Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1 1/2"-12
    		2 1/4"1 9/32"Material Certificate with Traceable Lot Number
    		191845A26500000
     

    Thin-Profile Hex Nuts

    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 5
    		ASME B18.2.2194846A565000000
     
    Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 5
    		ASME B18.2.2194846A2270000
     
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 8
    		ASME B18.2.2193839A865000000
     
    Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 8
    		ASME B18.2.2192052A37000000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 2
    		191078A26500000
     
    Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 2
    		190494A2410000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1 1/2"-12
    		2 1/4"27/32"191847A44100000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1 1/2"-12
    		2 1/4"27/32"194805A26800000
     
    Brass
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    1 1/2"-12
    		2 1/4"27/32"192174A690000000
     

    Heavy-Profile Hex Nuts

    About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Extreme-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Heavy-Profile Hex Nuts.
    These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs.
    Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Steel
    1 1/2"-12
    		2 3/8"1 15/32"ASTM Grade 2H
    		ASTM A194
    		Material Certificate with Traceable Lot Number
    		190521A052000000
     

    Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 1/2"-12
    		2 13/64"1 39/64"SAE Grade 8
    		220197135A114000000
     
    Black-Oxide Steel
    1 1/2"-12
    		2 13/64"1 39/64"SAE Grade 8
    		220197135A44200000
     
    Steel
    1 1/2"-12
    		2 13/64"1 39/64"SAE Grade 8
    		220190630A20700000
     

    High-Profile Hex Nuts

    Image of Product. Bottom orientation. Hex Nuts. High-Profile Hex Nuts.
    Slightly taller than standard-profile hex nuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Steel
    1 1/2"-12
    		2 3/16"2"SAE Grade 8
    		SAE J995
    		190565A061000000
     

    Thin-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Thin-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 1/2"-12
    		2 3/16"51/64"SAE Grade 8
    		Not Rated194945A290000000
     
    Black-Oxide Steel
    1 1/2"-12
    		2 11/64"51/64"SAE Grade 8
    		250194945A11700000
     

    Thin-Heavy-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Thin-Heavy-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Black-Phosphate-Coated Steel—The dark coating creates both a finished appearance and a barrier against rust that withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Each
    Black-Phosphate-Coated Steel
    1 1/2"-12
    		2 3/8"1 5/16"ASTM Grade C
    		25093126A120000000
     

    Left-Hand-Thread Thin-Profile Hex Nuts

    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"27/32"SAE Grade 5
    		199612A227000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1 1/2"-12
    		2 1/4"27/32"ASME B18.2.2194450A541000000
     
    Brass
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Certificate Type
    Each
    Brass
    1 1/2"-12
    		2 1/4"27/32"Material Certificate with Traceable Lot Number
    		92117A940000000
     

    Coupling Nuts

    Image of Product. Front orientation. Coupling Nuts. Coupling Nuts.
    Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.
    Low-Strength Steel
    Rated Grade 2 or lower, these are about half as strong as medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Each
    Thread
    Size
    Lg.
    Wd.
    Threading
    1-9
    10-49
    50-Up
    Zinc-Plated Steel
    1 1/2"-12
    		3 1/2"2"Fully Threaded90264A295000000000000000000
     
    High-Strength Steel
    Rated Grade 8 or Class 10, these are about 25% stronger than medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Each
    Thread
    Size
    Lg.
    Wd.
    Fastener Strength
    Grade/Class
    Threading
    1-9
    10-49
    50-Up
    Zinc-Plated Steel
    1 1/2"-12
    		3 1/2"2 1/4"SAE Grade 8
    		Fully Threaded90983A2630000000000000000000
     

    Locknuts for use with Cotter Pins

    Image of ProductInUse. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Image of Product. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Thread
    Size
    Wd.
    Ht.
    For Cotter
    Pin Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"1 5/16"5/16"195030A380000000
     
    Black-Oxide Steel
    1 1/2"-12
    		2 1/4"1 9/32"5/16"195030A61000000
     

    Top-Lock Distorted-Thread Locknuts

    Image of Product. Front orientation. Locknuts. Top-Lock Distorted-Thread Locknuts.
    Irregularly shaped threads at the top of these locknuts grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1 1/2"-12
    		2 1/4"1 5/16"ASTM Grade C
    		192501A54600000
     

    Thin-Profile Flex-Top Locknuts for Heavy Vibration

    Image of Product. Front orientation. Locknuts. Thin-Profile Flex-Top Locknuts for Heavy Vibration.
    About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Steel
    These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Cadmium-Plated Steel
    1 1/2"-12
    		2 3/16"57/64"194830A123000000
     
    Steel
    1 1/2"-12
    		2 3/16"57/64"194830A14400000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Installation Tool, Drill Bit, Through-Hole Tap.

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    1 1/2"-12
    		2.250"1 17/32"
    		1.531"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A137000000000
     

    Helical Threaded Inserts

    Image of Product. Pronged. Bottom orientation. Threaded Inserts. Helical Threaded Inserts, Pronged.

    Pronged

    Restore, reinforce, or create threads in metal. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Inserts with
    Installation Tools
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    No. of Inserts
    Included
    Each
    Pronged
     
    18-8 Stainless Steel
    1 1/2"-12
    		2.250"1 17/32"
    		1.531"MS124709191732A05400000091709A083000000091709A5210000000491732A137000000000
     
    Extraction Tools
    Remove installed helical inserts.
    For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.
    For Thread Size
    Each
    For Pronged Helical Inserts
    1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-8, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-8, 1 1/2"-12, M27, M30, M36, M39
    		90254A3600000000
     

    Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Key-Locking Threaded Inserts for Soft Metal.
    Add strong threads in soft metal, such as aluminum. The keys on these inserts drive into holes to hold more securely than thread-locking or helical inserts. They prevent slipping and rotating, so they’re stable enough for use in vehicle or aerospace parts that experience heavy vibration. These inserts are comparable to Keensert inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Inserts with
    Installation Tools
    Each
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    1-9
    10-Up
    Each
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    1 1/8"-7
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"490245A09100000000000092100A7490000000290245A0630000000
    1 1/8"-12
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"490245A096000000000092100A749000000————0
    1 1/2"-12
    		1 7/8"-12
    		2"—1.813"490245A11300000000000092100A758000000————0
     
    Extra-Thick Wall
     
    Black Phosphate-Coated Steel
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.438"493302A650000000000093302A74000000————0
     
    18-8 Stainless Steel
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.438"493340A83500000000000093302A74000000————0
     

    Key-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Key-Locking Threaded Inserts with Installation Tools.
    Paired with the right tool for installation, these inserts create strong threads in soft metal, such as aluminum. They have keys that drive into material to prevent inserts from slipping and rotating in the hole.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    1 1/8"-7
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"4290245A0630000000
     

    Mil.-Spec. Key-Locking Threaded Inserts For Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Mil.-Spec. Key-Locking Threaded Inserts For Soft Metal.
    These inserts are manufactured and tested to meet or compare to strict standards adopted by the U.S. military. The keys drive into aluminum and other soft metal for a secure hold that won't slip or rotate, even in vibrating vehicle or aerospace parts. These inserts are comparable to Keensert inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Specs. Met
    Each
    Each
    Extra-Thick Wall
     
    18-8 Stainless Steel
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.442"4MS51832-11193904A25300000093904A777000000
     
    back to top