About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.

Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.

Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.

Nearly 10% wider and taller than standard steel-insert locknuts, these handle heavier loads by distributing them over a larger area. They also have the most secure hold of all the heavy-profile locknuts we offer. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure that they're even used to fasten components on roller coasters. These locknuts are also reusable, but their holding power decreases after the first use, so you should use a new nut for the strongest possible hold.