Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Choose these locks if you need locks that each open with a different key.

Plastic locks resist corrosion better than zinc locks so they’re best for damp and humid environments. They also help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage. All have a pull tab that makes it easier to open doors than other locks that don’t have an added grip. They mount in a standard installation hole.

For technical drawings and 3-D models, click on a part number.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size. Choose them if you need several locks that open with the same key. Often used to secure cabinet doors and file drawers, all come with a straight cam and a reversible offset cam to accommodate different latching distances.

Nylon plastic locks are suitable for damp and humid environments. However, they’re easier to drill into or tamper with than metal locks.

For technical drawings and 3-D models, click on a part number.

Install these locks on cabinet doors and file drawers with a smaller-than-standard diameter through hole. These locks are keyed alike, so they're good for applications where you need several locks to open with the same key.

Nylon plastic locks are suitable for damp and humid environments.

For technical drawings and 3-D models, click on a part number.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Choose these locks if you need several locks that open with the same key.

Plastic locks resist corrosion better than zinc locks so they’re best for damp and humid environments. They also help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage. All have a pull tab that makes it easier to open doors than other locks that don’t have an added grip. They mount in a standard installation hole.

For technical drawings and 3-D models, click on a part number.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. To accommodate different latching distances, each lock comes with either three nonreversible offset cams or one straight cam and two nonreversible offset cams.

For technical drawings and 3-D models, click on a part number.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. All are made of plastic, so they won’t break down in damp and humid environments. They also help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage.

These locks open with a square key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

The cutout for these locks requires a special through-hole shape. All locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure your enclosure. All include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

These locks open with a square key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. They won’t corrode in areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight.

For technical drawings and 3-D models, click on a part number.

Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, they’re faster to install than locks with an adjustable latching distance. They come with multiple cams to accommodate different latching distances.

Stainless steel and plastic locks resist corrosion better than zinc locks. Plastic locks are the lightest in weight and do not conduct electricity. However, they’re easier to drill into and tamper with compared to metal locks.

Locks with a pull tab give you a spot to grab to easily open doors and panels.

All have a gasket that keeps dust and water from getting in through the lock. This helps you maintain your sealed enclosure’s IP or NEMA rating. IP65 rated locks seal out water from low-pressure washdowns. IP67 rated locks block out water if your sealed enclosure is briefly submersed.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure your enclosure. All include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

These locks open with a triangle key (sold separately), so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

Stainless steel and plastic locks are more corrosion resistant than zinc locks, so they’re best for areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight.

For technical drawings and 3-D models, click on a part number.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. The locks help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage.

These locks open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.

All of these locks include one cam with a fixed latching distance. Since you won’t have to adjust the cam into position, they are faster to install than those with an adjustable latching distance.

Locks with a pull tab make it easier to open doors than other locks that don’t have an added grip.

Locks that meet UL 94 V-0 self-extinguish in the event of a fire.

For technical drawings and 3-D models, click on a part number.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those found in food processing plants. Open these locks with a two-way key (sold separately). Often called a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers.

To accommodate different latching distances, these locks come with three cams. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, they’re quick to install. The cam rotates 90° to secure your enclosure, so these locks are also known as quarter-turn locks.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. Plastic locks are the lightest in weight and do not conduct electricity. However, they’re easier to drill into compared to metal locks.

For technical drawings and 3-D models, click on a part number.

Quickly snap these locks into a through-hole cutout—no need to fasten them with a screw. They fit snugly in their cutout to stand up to the same vibration that traditional cam locks withstand. These locks open with a two-way key, also called a double-bit key. This means they match a keying system that’s common for industrial enclosures, but they’re more secure than locks that open with a hex key or screwdriver. Their flat, concealed design also stops others from tampering with them using pliers.

These locks include one cam with a fixed latching distance. Since you don’t have to adjust the cam into position, they’re faster to install than those with an adjustable latching distance. The cam rotates 90° to secure enclosures, so they’re also known as quarter-turn locks. Made of nylon, these locks are lightweight and won’t corrode from moisture. They help keep your sealed enclosure’s contents safe from dust and water damage, maintaining your enclosure’s IP65 rating.

Locks with a pull tab give you a spot to grab to easily open doors and panels.

Locks that meet UL 94 V-0 self-extinguish if they catch fire.

For technical drawings and 3-D models, click on a part number.

Open these locks with a two-way key (sold separately). Also known as a double-bit key, it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery. These locks also have a flat, concealed design that prevents others from tampering with them using pliers. Their cam rotates 90° to close enclosure doors, so they’re also known as quarter-turn locks.

Locks with a fixed latching distance are best when you know the precise distance you need. They’re faster to install than locks with an adjustable latching distance, since you won’t have to adjust the cam into position. To accommodate different latching distances, they come with multiple cams.

Stainless steel and plastic locks resist corrosion better than zinc locks. Plastic locks are the lightest in weight and do not conduct electricity. However, they’re easier to drill into and tamper with compared to metal locks.

Locks with a pull tab give you a spot to grab to easily open doors and panels.

IP or NEMA rated locks have a gasket that keeps dust and water from getting in through the lock.

For technical drawings and 3-D models, click on a part number.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All have a cam that rotates to keep doors closed. Choose these locks if you need several locks that open with the same key.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. They won’t corrode in areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than metal locks.

Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage. These locks also help keep your sealed enclosure's contents safe from water damage because they help maintain an enclosure's IP rating for low-pressure washdowns.

For technical drawings and 3-D models, click on a part number.

Remotely open your enclosure door with a card reader, manual release button, or other access control device. These locks have a switch that opens the lock when it receives power from your access system. They can also trigger a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of emergency, these locks manually open with a key. Choose them if you need several locks that open with the same key.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything that passes by.

These locks have a cam that rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. To adjust their fixed latching distance, they come with multiple cams. They also include a stainless steel shutter that blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

Press the button and the handle snaps open; push the handle shut for a secure hold. Also known as compression cam latches, these locks anchor your door shut using a lever with a screw at the end instead of a standard cam. Turn the screw to adjust the latching distance and tension. The handle folds into a recessed position to stay out of the way. Choose them if you need several locks that open with the same key.

Nylon plastic locks work well in damp and humid environments. They have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder, preventing internal damage.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and water from washdowns from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches have one or more cams that each have a fixed latching distance. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

Stainless steel and plastic latches are more corrosion resistant than zinc latches. They can be used in areas that are constantly exposed to moisture. The plastic latches are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than the metal latches.

For technical drawings and 3-D models, click on a part number.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Turn the head a quarter turn to latch, then turn it another quarter turn to create compression and minimize rattling from vibration. A gasket helps keep dust and water from washdowns from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating.

Latches with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. Latches with offset cams include multiple cams, so you can change the fixed latching distance. Stainless steel and plastic latches are more corrosion resistant than zinc latches, so they're better for use in wet environments. The plastic latches are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than the metal latches. All meet UL 94 V-0, so they will self-extinguish in the event of a fire.

Style D latches have a handle that folds down and out of the way when it’s not in use.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use. Often used on cabinet doors and file drawers, these latches have a metal arm that swings to lock. All can be adjusted to a range of latching distances, which is useful if you don’t know the precise measurements. When mounting the cam, adjust the latching distance and choose your turn direction.

Nylon plastic latches withstand damp and humid environments.

For technical drawings and 3-D models, click on a part number.

Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code. They’re commonly used on server cabinets, electrical panels, and other telecommunication enclosures. For easy latching and unlatching, the handle swings smoothly when raised. It lies flat when locked, so it won’t snag anything passing by. Select the turn direction when mounting the cam. Locks come with a straight cam and two nonreversible offset cams to accommodate different latching distances. When installing, program a permanent number combination of your choice. These locks also come with two keys.

For technical drawings and 3-D models, click on a part number.