We will reply to your message within an hour.
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.
For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.
Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.
Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.
Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.
Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.
These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.
Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.
Mount to a surface to secure and route cable.
Organize and secure multiple cables in a cable run with a single holder.
Add a hook and loop cable tie to these mounts to secure a bundle.
Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.
Secure a bundle and then use the grommet to temporarily hang it from a hook or peg.
Quickly attach and detach a bundle.
Mount bundles to surfaces with a screw or fastener. Since the mounting grommet on these ties is not accessible after material has been bundled, these ties are best for a permanent installation.
Stick these ties to any smooth, clean surface.
Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.
Attach these cable ties directly to a surface—no separate mount needed.
Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.
Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.
Made of nylon, these clamps have excellent corrosion and chemical resistance, don’t conduct electricity, and weigh less than metal clamps.
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.
Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.
Secure the levers on your cam-and-groove socket, so they don’t accidentally release and spill the contents of your line.
With no metal parts, these valves are often used for noncontact flow adjustment in wet conditions and harsh environments. All press down on the outside of tubing to adjust flow without contacting the process media.
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.