For a better seal in low-pressure applications, such as hydraulic return lines and oil drain plugs, these O-rings are softer than standard Buna-N O-rings.

Also known as boss O-rings, these O-rings are sized to fit straight threaded fittings to prevent leaks. With a 90A durometer hardness, they’re more wear resistant than standard Buna-N O-rings.

With four points of contact for a strong seal, these X-profile O-rings are often used in dynamic applications, such as on pistons and rotating shafts. Also known as Quattro seals and X-rings, they resist rolling and twisting better than round- and square-profile O-rings.

Choose these O-rings for their adherence to strict military standards for material and construction.

These Buna-N O-rings are made and bagged in an ISO Class 7 (Fed. Std. 10,000) clean room.

More abrasion resistant than Buna-N O-rings, these also resist mineral oil and motor oil.

These hard O-rings offer better wear resistance than standard Viton® fluoroelastomer O-rings.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life.

Because one black O-ring looks just like another, these O-rings are brown for easy identification.

Made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection. They are brown for easy identification.

Our most chemical-resistant Viton® fluoroelastomer O-rings. Made of Viton® ETP, these O-rings stay strong when used with harsh chemicals including acetone, MEK, and sodium hydroxide. They also keep their elasticity and shape under constant motion in steam and heat.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.

Able to bounce back after repeated compression, these Kalrez 7075 O-rings last longer than other Kalrez O-rings when exposed to repeated heating/cooling cycles.

Also known as Boss O-rings, these Kalrez 4079 O-rings are for use in tube fittings with a straight-thread connection. They’re inherently softer and more compressible than PTFE O-rings with comparable chemical resistance.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.

If these O-rings deteriorate and fall in your line, they’ll be caught by metal- and X-ray-detection systems.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

Resistant to changing weather—from rainwater to sunlight—these neoprene O-rings are good for outdoor use.