These fixtures disperse light from the sides as well as the bottom to produce ambient lighting ideal for indoor spaces such as offices and storage rooms. Rated for use in damp locations, these lights withstand humidity and moisture. All have a lens that disperses light evenly. Lights can be hardwired to operate on any of the voltages listed.

Those with a neutral light appearance emit a neutral white light often found in workspaces. Others with a neutral and cool light appearance have a selectable light appearance so they can emit neutral or cool light.

Add suspension hardware (sold separately) to hang lights from the ceiling. Suspension hardware for style A includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length and tighten clamps to secure. Suspension hardware for style B includes a mounting plate, an adjustable cable assembly, and a feed cord with three wire leads.

Also known as troffers, these lights fit most standard drop-ceiling grids, so they’re often used in indoor spaces such as offices and storage rooms. They can be hardwired to operate on any of the voltages listed. Solid lens are frosted and smooth or prismatic to disperse light evenly. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than fluorescent lights. They emit a neutral white light often found in workspaces.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation. No need for a permit—these lights don't require opening the space above the ceiling. They connect to standard housings with the included springs and cables. Just remove the old lens, bulbs, drivers, and their wiring before installation. DLC (DesignLight Consortium) listed, these lights have been tested to confirm their energy efficiency. They’re also ETL listed for use in damp locations.

Adjust the light appearance and brightness to match your existing lighting. The frosted lens disperses light evenly to prevent glare on equipment.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement. They’re commonly used in hallways and small storage spaces.

Lights with rechargeable batteries stay on for 3 minutes after motion stops. Their mounting plate attaches to surfaces with the included fasteners or adhesive. The light connects to the mounting plate with magnets, so it’s easy to take off when it’s time to charge. You can also attach the light directly to any magnetic surface. The polycarbonate lens resists impacts. These lights cannot be sold to Canada due to energy efficiency requirements.

Lights with disposable batteries stay on for 20 seconds after motion stops. Rated IP04, they’re sealed to keep out splashing and dripping water. They’re also CE marked to meet European safety standards.

Hardwired lights are configurable. Set them to turn off after 30 or 180 seconds. Select a warm, neutral, or cool light appearance to fit your environment. For spaces that occasionally get natural light, you can set these lights to stay off when there’s sufficient ambient light. Turn off the sensor to use them as regular ceiling lights.

Neutral lights are often found in workspaces. Warm lights have a yellow tone similar to incandescent lights. Cool lights highlight white and blue tones. This is ideal for inspection areas, workshops, and other areas that require high visibility.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens. A good choice for public spaces such as parking garages and stairwells, the lens is secured with tamper-resistant Torx screws to prevent vandalism. They have a center pin that makes them difficult to remove without special tools. The lens disperses light from the sides and bottom for ambient lighting.

Install these lights in covered areas indoors or outdoors—UL listed for wet locations, they’re sealed against humidity and dripping, splashing, and falling liquids.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity. They also store up to 12 hrs. of runtime that can be split over several days, so they brighten spaces even on cloudy days and at night. And don't worry about accidentally leaving the lights on and draining the battery—a timer switch turns them off after a set period of time, up to 2 hrs. To maximize battery runtime, these lights use energy-efficient LEDs. They cast a neutral white light that's found in most workspaces and make colors appear natural and vibrant. IP65 rated, they’re dust tight and can handle sprays of water such as those from a garden hose. This means wind, rain, and snow won’t be a problem.

They include all you’ll need to install them: a solar panel, battery, lights, and a timer switch, plus cables to connect them. The lights and solar panels have magnets as well as mounting holes. Pop them on metallic surfaces or bolt them down for permanent installation (fasteners not included). The battery works best when insulated from extreme temperatures—mount it inside your structure for optimal runtime. But if you have to install it outdoors, the battery will be protected from weather in a stainless steel enclosure that’s NEMA 3R rated.

Lights with a 100W solar panel work well in areas with at least 4 1/2 hrs. of direct sunlight between 9 AM and 3 PM. Lights with a 200W solar panel work well in areas with less than 4 1/2 hrs. of direct sunlight between 9 AM and 3 PM.

Two ceiling lights cover up to 160 sq. ft, about the size of a 20 ft. shipping container or small storage area. Three ceiling lights cover up to 320 sq. ft, about the size of a 40 ft. shipping container or small workshop.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets. Pop these lights into the included magnetic mounting brackets or hang them by their hooks—they’re easy to remove when it’s time to charge. To save battery, they have a motion sensor, so they only light up when they detect movement. They emit a neutral white light through a clear lens, providing bright, focused lighting so you can quickly find what you need. The lens is made of polycarbonate for impact resistance. UL listed for use in damp locations, these lights can handle humidity and moisture.

These lights cannot be sold to Canada due to energy efficiency requirements.

Link these lights together to create different shapes with a sleek look. Also known as slot lights, they’re often found hung from, mounted to, or recessed into ceilings in offices and cafeterias. Any shape you form will be lit up continuously because the L, tee, and X connectors (sold separately) light up. Straight connectors (sold separately) link two lights together from the inside. There’s no need for tools for any connections. Remove the end panels, push together the electrical cables, and snap the light in place. You can link up to 32 feet of lights together with a single power connection. These lights include all necessary hardware for mounting.

Choose between a warm or neutral light appearance on the power supply to match existing lights. Each LED is inspected to make sure there are no visible differences in temperature and brightness, so you can combine multiple lights within the same space.

Suspension lights can send up to half their light upward to reduce glare, prevent eye strain, and make your space appear larger. Use them against a white ceiling for the best effect.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement. Once movement stops, they’ll dim or turn off completely—choose your preference with the controls in front. You can also adjust the light duration and sensor range. These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency.

Choose between a neutral or cool light appearance on the LED driver to match existing lights. To minimize glare, the frosted lens disperses light evenly. It’s also made of polycarbonate to resist impact.

All are UL listed to resist humidity and moisture, so they’ll work in damp locations. Lights with a backup battery shine a 1,000 lumen light for 90 minutes if the power goes out.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.