Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.

For technical drawings and 3-D models, click on a part number.

A sealed design prevents contamination in dirty and dusty environments. Use these manifolds to serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Each valve can be removed for cleaning without disturbing the rest of the system. They can be used with any oil grade. Flow rate depends on temperature. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced. Use them to serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Each valve can be removed for cleaning without disturbing the rest of the system. They can be used with any oil grade. Flow rate depends on temperature. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Deliver an equal amount of oil to multiple lubrication points at once. They come with tubing to access hard-to-reach areas. These manifolds can be used with any oil grade.

Connect these modular pumps to your air system and add a reservoir and solenoid valve to automate the flow of oil. Install or remove pumps as your lubrication needs change. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.

Pumps with spray nozzle provide a broader dispensing pattern. Nozzle bends and stays in position.

Note: For proper operation, pumps require a three-way solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).

For technical drawings and 3-D models, click on a part number.

Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.

For technical drawings and 3-D models, click on a part number.

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use retaining ring pliers to turn the flow-adjustment nut. Pumps and their components come mounted on a panel.

For technical drawings and 3-D models, click on a part number.

Add faucets to oil dispensing stations for increased utility.