McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    17 Products

    Assembly Lubricants for Food and Beverage

    Image of Product. Front orientation. Assembly Lubricants. Assembly Lubricants for Food and Beverage, Can.
    Image of Product. Front orientation. Assembly Lubricants. Assembly Lubricants for Food and Beverage, Tube.

    Can

    Tube

    For use in food-processing and preparation areas, these lubricants are rated for incidental food contact. Coat tight-fitting parts with them before sliding together to make assembly easier.
    Mineral Oil Base—Mineral-oil-based lubricants have a high load-carrying capacity and can lubricate sliding loads at low-to-medium speeds.
    Synthetic Oil Base—Synthetic-oil-based lubricants have excellent moisture resistance.
    Container
    Each
    Package
    Size, fl.
    oz.
    Net Wt.,
    lb.
    Type
    Temperature
    Range
    Food Industry Std.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Mineral Oil Base
     
    DuPont Molykote P-1900 Anti-Seize Paste
    —1Can-20° F to 570° FFDA Compliant 21 CFR 178.3570, NSF Registered H1Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000000————0
     
    Synthetic Oil Base
    4—Tube-40° F to 350° FNSF Registered H1
    		Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000001200000000000000
     

    Assembly Lubricants for Rubber and Plastic

    Image of Product. Front orientation. Assembly Lubricants. Assembly Lubricants for Rubber and Plastic, Tube.
    Image of Product. Front orientation. Assembly Lubricants. Assembly Lubricants for Rubber and Plastic, Bottle.
    Image of Product. Front orientation. Assembly Lubricants. Assembly Lubricants for Rubber and Plastic, Spray Bottle.

    Tube

    Bottle

    Spray

    Bottle

    For hoses and other tight-fitting parts, apply these lubricants to rubber or plastic before assembling and disassembling. After drying, they lose their lubricity, so parts stay together. They leave no residue on assembled parts.
    Semi-Synthetic Oil Base—Semi-synthetic-oil-based lubricants are a mix of synthetic and vegetable oil and are compatible with most plastic and rubber. They’re frequently used with hoses, O-rings, seals, and rubber grips.
    Water Base—Water-based lubricants are designed for use with polyurethane and vinyl conveyor roller covers.
    Container
    Each
    Package
    Size, fl.
    oz.
    Type
    Temperature
    Range
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Semi-Synthetic Oil Base
    0.3Tube40° F to 85° FAluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000001000000000000000
    16.1Bottle40° F to 85° FAluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium0000000000012000000000000
     
    Water Base
    32Spray BottleNot RatedAluminum, Brass, Carbide, Cast Iron, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000000————0
     

    Assembly Lubricants

    Image of Product. Front orientation. Assembly Lubricants. Jar.

    Jar

    Image of Product. Front orientation. Assembly Lubricants. Aerosol Can.

    Aerosol

    Can

    Image of Product. Front orientation. Assembly Lubricants. Can.

    Can

    Image of Product. Front orientation. Assembly Lubricants. Tube.

    Tube

    Coat tight-fitting metal parts, such as gears, clutches, and press-fit assemblies, with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.
    For hoses and other tight-fitting parts, apply these lubricants to rubber or plastic before assembling and disassembling. After drying, they lose their lubricity, so parts stay together. They leave no residue on assembled parts.
    Mineral Oil Base—Mineral-oil-based lubricants, derived from petroleum, are more economical than synthetic-oil-based lubricants.
    Synthetic Oil Base—Synthetic-oil-based lubricants last longer than mineral-oil-based lubricants.
    DuPont Molykote G-Rapid Plus Paste—Molykote G-Rapid Plus Paste is often used to assemble threaded spindles, gears, screws, and pumps. It can be used as an initial lubricant and has a high load-carrying capacity.
    DuPont Molykote G-Rapid Plus Spray—Molykote G-Rapid Plus Spray has a high load-carrying capacity.
    DuPont Molykote DX Paste—Molykote DX Paste has good corrosion resistance. It provides long-lasting lubrication after assembly and has a high load-carrying capacity.
    Lubriplate No. 105—Lubriplate No. 105 is often used to assemble motor and engine components. It has excellent moisture resistance.
    DuPont Molykote M-77 Paste—Molykote M-77 Paste is commonly used on brakes and clutches; it is compatible with material that is damaged by mineral oil, such as natural rubber, SBR, and EPDM. As a paste it lubricates to 445° F; after drying, it continues to lubricate at temperatures up to 660° F. It has a high load-carrying capacity.
    Graphite Additive—Lubricants with graphite have additional pressure resistance and excellent temperature resistance.
    Molybdenum Disulfide Additive—Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance.
    Zinc Additive—Lubricants with zinc prevent corrosion.
    Container
    Each
    Package
    Size, fl.
    oz.
    Net Wt.
    Type
    Additive
    Temperature
    Range
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Mineral Oil Base
     
    DuPont Molykote G-Rapid Plus Paste
    8.8—JarGraphite, Molybdenum Disulfide-30° F to 840° FAluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000000100000000000000
     
    DuPont Molykote G-Rapid Plus Spray
    —17.28 oz.Aerosol CanGraphite, Molybdenum Disulfide-30° F to 750° FAluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium0000000000012000000000000
     
    DuPont Molykote DX Paste
    —2.2 lb.Can—-15° F to 255° FAluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium000000000000————0
     
    Lubriplate No. 105
    10—TubeZinc-25° F to 140° FAluminum, Brass, Carbide, Cast Iron, Copper, Glass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium0000000000036000000000000
     
    Synthetic Oil Base
     
    DuPont Molykote M-77 Paste
    33.3—JarMolybdenum Disulfide-50° F to 750° FAluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium0000000000001200000000000000
     
    back to top