With just a half turn or a light push, these valves connect to luer lock fittings on your line. Their universal connection size fits any luer lock plug or socket.

Polycarbonate valves are lighter in weight than metal valves, but they aren’t as durable.

Connections without a locking ring are quicker to install and remove than those with a locking ring. Also known as luer slip connections, all they need is a light push. Add a snap-on ring (sold separately) to lock your connection in place and color code your line.

Connections with a locking ring are more secure than those without a locking ring, so they’re better for high pressures. Give the ring a half turn to lock them in place. You can’t remove the locking ring.

Insert tubing into the fittings on these valves—no heat, solder, or flux required. They operate on electricity to automatically start and stop flow.

Valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.