About On/Off Valves
More
Plastic On/Off Valves with Compression Fittings
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: Buna-N Rubber
A compression sleeve bites into tubing as you tighten the nut, forming a strong seal. These valves are full port, so they do not restrict flow.
On/Off Valves with Compression Fittings
Made of metal, these valves are more durable than plastic valves and withstand higher temperatures. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.
316 stainless steel valves are more corrosion resistant than brass valves.
Lever handles give you the most leverage for quickly opening and closing valves with minimal effort. Lockable handles can be fixed in place using a padlock (not included).
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Air, Oil, Water
- Seal Material: Buna-N Rubber
- Valve Type: Ball
- For Use With: Drinking Water, Oil, Steam, Water
- Seal Material: Buna-N Rubber
- Specifications Met: NSF/ANSI 61
Drain | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Thread Size | Gender | Thread Type | Each | |
Compression × Compression | |||||||||||
| 5/8" | 16 | 600 psi @ 215° F | 600 psi @ 215° F | -20° to 400° | Full | 3" | M8 × 1.25 mm | Male | Metric | 0000000 | 000000 |
| 7/8" | 30 | 600 psi @ 215° F | 600 psi @ 215° F | -20° to 400° | Full | 3 7/16" | M8 × 1.25 mm | Male | Metric | 0000000 | 00000 |
| 1 1/8" | 52 | 600 psi @ 215° F | 600 psi @ 215° F | -20° to 400° | Full | 4" | M8 × 1.25 mm | Male | Metric | 0000000 | 00000 |
- Valve Type: Plug
- For Use With: Air, Oil, Water
| For Tube OD | Pipe Size | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Compression × Compression | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | __ | 30 psi @ 70° F | -40° to 250° | Standard | 1 5/8" | 0000000 | 000000 |
| 5/16" | __ | 30 psi @ 70° F | -40° to 250° | Standard | 1 11/16" | 0000000 | 00000 |
| 3/8" | __ | 30 psi @ 70° F | -40° to 250° | Standard | 1 3/4" | 0000000 | 00000 |
| 1/2" | __ | 30 psi @ 70° F | -40° to 250° | Standard | 2 1/16" | 0000000 | 00000 |
Compression × NPT Male | |||||||
| 1/4" | 1/8 | 30 psi @ 70° F | -40° to 250° | Standard | 1 13/16" | 0000000 | 00000 |
| 1/4" | 1/4 | 30 psi @ 70° F | -40° to 250° | Standard | 2" | 0000000 | 00000 |
| 3/8" | 1/4 | 30 psi @ 70° F | -40° to 250° | Standard | 2" | 0000000 | 00000 |
- Valve Type: Ball
- For Use With: Air, Oil, Steam, Water
- Seal Material: PTFE Plastic
| For Tube OD | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Compression × Compression | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | __ | 1.3 | 2000 psi @ 70° F | 150 psi @ 350° F | -40° to 400° | 29 | Standard | 3 9/16" | 17/64" | 0000000 | 0000000 |
| 3/8" | __ | 2.5 | 2000 psi @ 70° F | 150 psi @ 350° F | -40° to 400° | 29 | Standard | 3 9/16" | 17/64" | 0000000 | 000000 |
Compression × NPT Male | |||||||||||
| 1/4" | 1/4 | 1.3 | 2000 psi @ 70° F | 150 psi @ 350° F | -40° to 400° | 29 | Standard | 3 1/16" | 17/64" | 0000000 | 00000 |
Compact On/Off Valves with Compression Fittings
- Valve Type: Ball
- For Use With: Air, Oil, Water
- Seal Material: Fluoroelastomer Rubber
A short body length and low profile make these valves ideal for installation in tight spaces, such as between pipelines. They have a compression sleeve that bites into tubing as you tighten the nut.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
Compression × Compression | ||||||||
| 1/4" × 1/4" | __ | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 1 15/16" | 0000000 | 000000 |
| 1/4" × 3/8" | __ | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 1 7/8" | 0000000 | 00000 |
| 3/8" × 3/8" | __ | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 2" | 0000000 | 00000 |
Compression × NPT Male | ||||||||
| 1/4" | 1/8 | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 2" | 0000000 | 00000 |
| 1/4" | 1/4 | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 2 1/16" | 0000000 | 00000 |
| 3/8" | 1/4 | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 2 1/8" | 0000000 | 00000 |
| 3/8" | 3/8 | 1.5 | 1000 psi @ 70° F | -40° to 300° | 29 | 2 1/8" | 0000000 | 00000 |
Easy-Maintenance On/Off Valves with Compression Fittings
- Valve Type: Ball
- For Use With: Air, Oil, Steam, Water
- Seal Material: TFM Plastic
With a three-piece bolted body that disassembles for access to internal components, you can clean and repair these valves without removing them from your line. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal. Made of 316 stainless steel, these valves offer excellent corrosion resistance. The lockable handle can be fixed in place using a padlock (not included).
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | For Max. Shackle Dia. | Each | |
316 Stainless Steel Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Compression × Compression | |||||||||
| 1/4" | 1.2 | 2500 psi @ 70° F | 250 psi @ 400° F | -15° to 400° | 29 | 3 3/16" | 7/32" | 0000000 | 0000000 |
| 3/8" | 3.7 | 2500 psi @ 70° F | 250 psi @ 400° F | -15° to 400° | 29 | 3 3/16" | 7/32" | 0000000 | 000000 |
On/Off Valves with Compression Fittings for Drinking Water
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: NSF/ANSI 61
Start and stop flow to your drinking water system without worrying about leaks. These valves have a compression sleeve that bites into tubing as you tighten the nut. They meet NSF/ANSI 61 for safe use in drinking water systems.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
Compression × Compression | |||||||
| 1/4" | __ | 1.4 | 125 psi @ 140° F | 40° to 140° | 3 1/8" | 0000000 | 00000 |
| 3/8" | __ | 3.1 | 125 psi @ 140° F | 40° to 140° | 3 3/8" | 0000000 | 0000 |
Compression × NPT Female | |||||||
| 1/4" | 1/4 | 0.8 | 125 psi @ 140° F | 40° to 140° | 2 13/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 2.8 | 125 psi @ 140° F | 40° to 140° | 2 15/16" | 0000000 | 0000 |
Compression × NPT Male | |||||||
| 1/4" | 1/4 | 0.4 | 125 psi @ 140° F | 40° to 140° | 3 5/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 2.5 | 125 psi @ 140° F | 40° to 140° | 3 1/2" | 0000000 | 0000 |
On/Off Valves with Compression Fittings for Food and Beverage
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: Buna-N Rubber
- Specifications Met: FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600
Control flow in lines where preventing leaks is critical, such as bottling lines. These valves have a compression sleeve that bites into tubing as you tighten the nut. They’re more secure than push-to-connect fittings. However, they’re more difficult to remove, so avoid using them in lines that require frequent disassembly. These valves are FDA compliant for direct contact with food. Made from polypropylene, they are hard and slippery to keep food from sticking. These valves resist chemicals and can handle harsh cleaners used in food equipment. They're full port valves, so they don't restrict flow.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
White Polypropylene Plastic Body | ||||||
|---|---|---|---|---|---|---|
Compression × Compression | ||||||
| 1/4" | __ | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 00000 |
| 3/8" | __ | 150 psi @ 75° F | 35° to 200° | 3 3/16" | 0000000 | 0000 |
Compression × NPTF Female | ||||||
| 1/4" | 1/4 | 150 psi @ 75° F | 35° to 200° | 2 13/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 0000 |
Compression × NPTF Male | ||||||
| 1/4" | 1/4 | 150 psi @ 75° F | 35° to 200° | 2 13/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 0000 |