About On/Off Valves
More
Compact Threaded On/Off Valves
Install these valves in tight spots, such as where pipelines are crowded together. They’re less than half as long as standard threaded valves and one-third shorter in height.
Bronze valves are stronger and more durable than brass valves.Screwdriver-operated valves are our most compact option. Since they open and close with a slotted screwdriver (not included), they’re also the most resistant to accidental movement.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Seal Material: Fluoroelastomer Rubber
On/Off Valves with 37° Flared Tube Fittings for Fuel
- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline
- Seal Material: PTFE Plastic
These valves have 37° flared tube fittings that form a tight seal on metal tubing lines to transfer diesel fuel, fuel oil, and gasoline. All are full port, so they do not restrict flow.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Tube OD | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Aluminum Body | ||||||
|---|---|---|---|---|---|---|
37° Flared × 37° Flared | ||||||
| 9/16"-18 | 3/8" | 200 psi @ 70° F | -40° to 250° | 2 9/16" | 0000000 | 0000000 |
| 3/4"-16 | 1/2" | 200 psi @ 70° F | -40° to 250° | 2 11/16" | 0000000 | 000000 |
| 7/8"-14 | 5/8" | 200 psi @ 70° F | -40° to 250° | 3 1/4" | 0000000 | 000000 |
| 1 1/16"-12 | 3/4" | 200 psi @ 70° F | -40° to 250° | 3 7/16" | 0000000 | 000000 |
| 1 5/16"-12 | 1" | 200 psi @ 70° F | -40° to 250° | 4 5/16" | 0000000 | 000000 |
On/Off Valves with 45° Flared Compression
Fittings for Natural Gas, Propane, and Butane
- Valve Type: Ball
- For Use With: Butane, Natural Gas, Propane
- Seal Material: PTFE Plastic
- Specifications Met: CSA Certified, CSA-US Certified, UL Listed
With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane. All have a T-handle that resists accidental movement when snagged or bumped. Valves are standard port, so they slightly restrict flow.
For technical drawings and 3-D models, click on a part number.
Couplers for High-Pressure Fill Valves
Fill tanks and recharge struts—these couplers join hose to high-pressure fill valves with Schrader threads.
Some couplers meet SAE AS4395, an automotive industry standard for flared fitting dimensions.
Couplers with a shut-off valve let you control the flow of air by hand. When used with Schrader valves that have a core, the core depressor pin in these couplers press valves open to let air flow in.
For technical drawings and 3-D models, click on a part number.
Female Threaded Hose ×
UN/UNF Male Flared Tube
Inlet | Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Size | Flared Angle | For Tube OD | Material | Max. Pressure, psi | Temp. Range, °F | Features | Specifications Met | Each | |
90° Elbow with a Shut-Off Valve | ||||||||||
| 0.305"-32 | 3/8"-24 | 37° | 3/16" | Brass | 3,000 | -40° to 160° | Core Depressor Pin | SAE AS4395 | 000000 | 000000 |
| 0.485"-26 | 3/8"-24 | 37° | 3/16" | Brass | 3,000 | -40° to 160° | Core Depressor Pin | __ | 000000 | 00000 |