About Gradual On/Off Valves
More
About On/Off Valves
More
Compact Threaded On/Off Valves for Chemicals
For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.
CPVC valves resist heat up to 195° F, so they’re the best choice if your system connects to a heater.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Stop Cock
- For Use With: Ammonia, Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
NPT Female × NPT Female | |||||||
|---|---|---|---|---|---|---|---|
| 1/4 | 1.6 | Standard | 150 psi @ 70° F | 35° to 120° | 2 13/16" | 00000000 | 000000 |
NPT Female × NPT Male | |||||||
| 1/4 | 1.6 | Standard | 150 psi @ 70° F | 35° to 120° | 2 3/4" | 00000000 | 00000 |
NPT Male × NPT Male | |||||||
| 1/4 | 1.2 | Full | 150 psi @ 70° F | 35° to 120° | 2 5/8" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With: Ammonia, Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
| Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
NPT Female × NPT Female | |||||||
|---|---|---|---|---|---|---|---|
| 3/8 | 7.7 | Full | 150 psi @ 70° F | 30° to 120° | 2 3/4" | 00000000 | 000000 |
| 1/2 | 14 | Full | 150 psi @ 70° F | 30° to 120° | 3 1/8" | 00000000 | 00000 |
| 3/4 | 29 | Full | 150 psi @ 70° F | 30° to 120° | 3 3/4" | 000000000 | 00000 |
| 1 | 47 | Full | 150 psi @ 70° F | 30° to 120° | 4 1/2" | 000000000 | 00000 |
- Valve Type: Stop Cock
- For Use With: Ammonia, Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
| For Tube ID | Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Each | |
Barbed × NPT Male | ||||||||
|---|---|---|---|---|---|---|---|---|
| 5/8" | 1/4 | 1.2 | Full | 150 psi @ 70° F | 35° to 120° | 3 11/16" | 000000000 | 000000 |
- Valve Type: Ball
- For Use With: Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Water
- Seal Material: EPDM Rubber
| Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
NPT Female × NPT Female | |||||||
|---|---|---|---|---|---|---|---|
| 3/8 | 7.7 | Full | 150 psi @ 70° F | 30° to 195° | 2 3/4" | 0000000 | 000000 |
| 1/2 | 14 | Full | 150 psi @ 70° F | 30° to 195° | 3 1/8" | 0000000 | 00000 |
| 3/4 | 29 | Full | 150 psi @ 70° F | 30° to 195° | 3 3/4" | 000000000 | 00000 |
| 1 | 47 | Full | 150 psi @ 70° F | 30° to 195° | 4 1/2" | 000000000 | 00000 |
Threaded Gradual On/Off Valves for Cryogenic Liquid
- Valve Type: Gate
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Natural Gas, Liquid Methane, Liquid Nitrogen, Liquid Oxygen
- Packing Material: PTFE Plastic
- Specifications Met: ASME B31.3, CGA G-4.1, MSS-SP-80
Built to handle the extreme cold of liquid gases, these bronze valves are ideal for liquid carbon dioxide carbonation systems, liquid nitrogen coolant systems, and other cryogenic applications. They’ll also work with liquified natural gas and liquid oxygen. They’re cleaned and bagged to meet CGA G-4.1 for oxygen service. Also known as gate valves, they open and close gradually with multiple turns of the wheel handle to prevent sudden starts and stops.
The handle raises as these valves open and lowers as they close. At a glance, you can see if flow is on or off. The stem is isolated from what’s flowing through your line, giving these valves a longer lifespan than valves with a nonrising stem. They have a threaded union stem housing, so you can separate the stem from the housing while the valve is inline. That means you can complete maintenance tasks, such as packing the stem, without taking apart your whole setup.
For technical drawings and 3-D models, click on a part number.
O'all | Stem | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Ht. | Lg. | Type | Housing Connection Style | Each | |
NPT Female | ||||||||||
Wheel Handle—Bronze Body and Brass Gate | ||||||||||
| 1/2 | 19.8 | 600 psi @ 72° F | -320° to 150° | 2 5/16" | 10 3/16" | 2 5/16" | Rising | Threaded Union | 0000000 | 0000000 |
| 3/4 | 36 | 600 psi @ 72° F | -320° to 150° | 2 1/2" | 11 5/16" | 2 1/2" | Rising | Threaded Union | 0000000 | 000000 |
| 1 | 60 | 600 psi @ 72° F | -320° to 150° | 2 7/8" | 13 1/2" | 2 7/8" | Rising | Threaded Union | 0000000 | 000000 |
| 1 1/2 | 152 | 600 psi @ 72° F | -320° to 150° | 3 7/16" | 18 3/8" | 3 7/16" | Rising | Threaded Union | 0000000 | 00000000 |
| 2 | 245 | 600 psi @ 72° F | -320° to 150° | 3 13/16" | 21 5/16" | 3 13/16" | Rising | Threaded Union | 0000000 | 00000000 |