Filter by
For Use With
Body Material
Fitting Connection
Actuation
Valve Function
Ball Material
Handle Type
Handle Style
Valve Type
Maximum Pressure @ Temperature
System of Measurement
Maximum Temperature
Seal Material
DFARS Specialty Metals
About On/Off Valves
More
Miniature Threaded On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
To withstand aggressive and corrosive solutions in miniature chemical-processing pipelines, these tiny valves have a chemical-resistant fluoroelastomer seal and a corrosion-resistant 303 stainless steel body. They are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
303 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
UNF Female × UNF Female | |||||||
| 10-32 | 0.1 | 250 psi @ 150° F | 0° to 400° | 25 | 11/16" | 0000000 | 0000000 |
Threaded Isolation On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol, Neon, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PEEK Plastic
- Specifications Met: ASME B16.34
Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. Also known as block and bleed valves, turn the handles to block both upstream and downstream flow, drain the liquid trapped in the valve through the bleed port, and then remove your instrument from the gauge port. Often used in chemical-processing lines, these valves have a PTFE seal and a corrosion-resistant 316 stainless steel body. All are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Gauge Port | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Each | |
316 Stainless Steel Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 1/4 | Female | NPT | 6.4 | 10000 psi @ 170° F | -65° to 450° | 0000000 | 0000000 |
Ultra-Chemical-Resistant Threaded On/Off Valves
The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene. They are standard port, so they slightly restrict flow.
Monel valves are more corrosion resistant than Alloy 20 valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Alloy 20 Stainless Steel Body
- Valve Type: Ball
- For Use With: Acetone, Air, Butane, Carbon Dioxide, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Kerosene, Methanol, Methyl Ethyl Ketone, Nitrogen, Propane, Soap Solutions, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: Alloy 20 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
Monel Body
- Valve Type: Ball
- For Use With: Acetone, Air, Carbon Dioxide, Diesel Fuel, Gasoline, Kerosene, Methyl Ethyl Ketone, Nitrogen, Salt Water, Soap Solutions, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: Monel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
On/Off Valves with Push-to-Connect Fittings for Chemicals
Straight Adapter, Push to Connect × Female NPT
Straight Adapter, Push to Connect × Male NPT
Straight Adapter, Push to Connect × Push to Connect
Straight Connector, Push to Connect × Push to Connect
90° Elbow Adapter, Push to Connect × Female NPT
90° Elbow Adapter, Push to Connect × Male NPT
90° Elbow Adapter, Push to Connect × Push to Connect
90° Elbow Connector,
Push to Connect ×
Push to Connect
Push to Connect ×
Push to Connect
Insert tubing into the fittings on these valves—no heat, solder, or flux required. To withstand aggressive and corrosive solutions, they have a chemical-resistant fluoroelastomer seal and a plastic body.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Black PVDF Plastic Body
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xylene - Ball Material: PVDF Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Port-to-Port Lg. | Each | |
Straight Adapter, Push to Connect × Female NPT Threaded | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 000000 |
| 1/4 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 1/4 | 1/2" | 7 | 125 psi @ 140° F | 35° to 140° | Full | 2 15/16" | __ | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 3/8 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 3/8 | 1/2" | 9.1 | 125 psi @ 140° F | 35° to 140° | Full | 2 15/16" | __ | 000000000 | 00000 |
| 1/2 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/16" | __ | 000000000 | 00000 |
| 1/2 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/16" | __ | 000000000 | 00000 |
| 1/2 | 1/2" | 6.8 | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/8" | __ | 000000000 | 00000 |
Straight Adapter, Push to Connect × Male NPT Threaded | |||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | __ | 000000000 | 00000 |
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/4 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | __ | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 3/16" | __ | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 3/16" | __ | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | __ | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/16" | __ | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/16" | __ | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/2" | __ | 000000000 | 00000 |
Straight Adapter, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 3/16" | __ | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | |||||||||
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | |||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
Black Nylon Plastic Body
- Valve Type: Ball
- For Use With: Air, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Helium, Kerosene, Mineral Spirits, Nitrogen, Salt Water, Soap Solutions, Water, Xylene
- Ball Material: Nylon Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Port-to-Port Lg. | Each | |
Straight Adapter, Push to Connect × Female NPT Threaded | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 000000 |
| 1/4 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 1/4 | 1/2" | 7 | 125 psi @ 140° F | 35° to 140° | Full | 2 15/16" | __ | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 3/8 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 2 5/8" | __ | 000000000 | 00000 |
| 3/8 | 1/2" | 9.1 | 125 psi @ 140° F | 35° to 140° | Full | 2 15/16" | __ | 000000000 | 00000 |
| 1/2 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/16" | __ | 000000000 | 00000 |
| 1/2 | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/16" | __ | 000000000 | 00000 |
| 1/2 | 1/2" | 6.8 | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/8" | __ | 000000000 | 00000 |
Straight Adapter, Push to Connect × Male NPT Threaded | |||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 7/16" | __ | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 7/16" | __ | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 3/16" | __ | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 3/16" | __ | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | __ | 000000000 | 00000 |
| 1/2 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/16" | __ | 000000000 | 00000 |
| 1/2 | 3/8" | 2.9 | 125 psi @ 140° F | 35° to 140° | Standard | 3 3/16" | __ | 000000000 | 00000 |
| 1/2 | 1/2" | 6.8 | 125 psi @ 140° F | 35° to 140° | Standard | 3 1/2" | __ | 000000000 | 00000 |
Straight Adapter, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 13/16" | __ | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/8" | __ | 000000000 | 00000 |
Straight Connector, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 2 13/16" | __ | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 2.9 | 125 psi @ 140° F | 35° to 140° | Full | 2 13/16" | __ | 000000000 | 00000 |
| __ | 1/2" × 1/2" | 6.8 | 125 psi @ 140° F | 35° to 140° | Full | 3 7/16" | __ | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | |||||||||
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | |||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | __ | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | |||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | __ | 1 11/16" | 000000000 | 00000 |
On/Off Valves with Barbed Fittings for Chemicals
Barbs grip onto tubing, providing a secure hold. To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a chemical-resistant seal.
PVDF valves have excellent chemical resistance. They withstand a variety of acids, solvents, and other harsh substances.
Lever handles show the valve’s position. Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Black PVDF Plastic Body with Lever Handle—Straight
Standard Barbed × Standard Barbed
NPT Male × Standard Barbed
- Valve Type: Ball
- For Use With: Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon, Xylene
- Ball Material: PVDF Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Standard Barbed × Standard Barbed | ||||||||
|---|---|---|---|---|---|---|---|---|
| __ | 1/4" | 0.4 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 000000 |
| __ | 3/8" | 1.5 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 00000 |
| __ | 1/2" | 5.9 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 00000 |
NPT Male × Standard Barbed | ||||||||
| 1/4 | 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 00000 |
| 1/4 | 3/8" | 1.5 | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 3 1/2" | 00000000 | 00000 |
Flanged On/Off Valves for Chemicals
Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.
Glass-filled vinyl ester valves stand up to a wide variety of harsh acids and solvents. You can rely on them for repeated use, changes in pressure and flow rate, and hot and cold conditions.
Valves with a lockable lever handle can be fixed in place with a padlock (not included). They give you more leverage than short lever handles, so you can quickly open and close the valve with minimal effort.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Yellow Glass-Filled Vinyl Ester Body with Lockable Lever Handle
- Valve Type: Ball
- For Use With: Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene, Water, Xylene
- Ball Material: Glass-Filled Vinyl Ester
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Packing Material: PTFE Plastic
- For Flange Specifications Met: ASME B16.5, ASME B16.10
Bolts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pressure Class | Flange OD | Circle Dia. | No. of Holes | Hole Dia. | Included | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Flanged × Flanged | |||||||||||||||
| 1 | 150 | 4 1/4" | 3 1/8" | 4 | 5/8" | No | 45 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 5" | 5/16" | 0000000 | 0000000 |
| 1 1/2 | 150 | 5" | 3 7/8" | 4 | 5/8" | No | 115 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 6 1/2" | 1/4" | 00000000 | 000000 |
| 2 | 150 | 6" | 4 3/4" | 4 | 3/4" | No | 165 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 7" | 5/16" | 0000000 | 000000 |
| 3 | 150 | 7 1/2" | 6" | 4 | 3/4" | No | 350 | 250 psi @ 100° F | -50° to 215° | 29.9 | Standard | 8" | 5/16" | 0000000 | 00000000 |
| 4 | 150 | 9" | 7 1/2" | 4 | 3/4" | No | 540 | 150 psi @ 100° F | -50° to 215° | 29.9 | Standard | 9" | 1/4" | 00000000 | 00000000 |