About Actuated On/Off Valves
More
About On/Off Valves
More
Plastic On/Off Valves with Barbed Fittings
Barbs grip onto tubing, giving these valves a secure hold. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.
PPE valves are flexible and can accommodate movement and vibration in your line without cracking. Unlike nylon, there's no risk of them swelling from use with water. With mounting tabs on the sides, you can connect these valves to nearby surfaces to keep connections tight during vibrations.
Full-port valves do not restrict flow.
- Valve Type: Ball
- For Use With: Air, Water
| For Tube ID | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Features | Each | |
Red PPE Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
Standard Barbed × Standard Barbed | |||||||
| 3/16" | 15 psi @ 65° F | 45° to 100° | Full | 2 1/8" | With Mounting Tab | 2824N11 | 000000 |
| 5/16" | 15 psi @ 65° F | 45° to 100° | Full | 2 1/8" | With Mounting Tab | 2824N12 | 00000 |
| 3/8" | 15 psi @ 65° F | 45° to 100° | Full | 2 3/4" | With Mounting Tab | 2824N13 | 00000 |
| 7/16" | 15 psi @ 65° F | 45° to 100° | Full | 2 3/4" | With Mounting Tab | 2824N14 | 00000 |
Solenoid On/Off Valves for Drinking Water
Safe for automated on/off control in drinking-water systems, these valves meet NSF/ANSI Standard 61. They operate on electricity to automatically start and stop flow.
All valves are normally closed unless actuated. They require a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
NSF/ANSI Standard 169 valves are rated for use with food equipment.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: CSA Certified, NSF/ANSI 169, NSF/ANSI 61
| Pipe Size  | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Each | |
Normally Closed—24V DC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | Female | NPT | 4.5 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 180° | 4 7/8" | 3 5/16" | 2492N12 | 0000000 |
| 3/4 | Female | NPT | 7 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 180° | 5 3/16" | 3 5/8" | 2492N14 | 000000 |
| 1 | Female | NPT | 13 | 150 psi @ 125° F | Pressure Drop Assisted | 35° to 180° | 6 1/2" | 3 7/8" | 2492N16 | 000000 |
Normally Closed—120V AC | ||||||||||
| 1/2 | Female | NPT | 4.5 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 180° | 4 7/8" | 3 5/16" | 2492N11 | 000000 |
| 3/4 | Female | NPT | 7 | 150 psi @ 180° F | Pressure Drop Assisted | 35° to 180° | 5 3/16" | 3 5/8" | 2492N13 | 000000 |
| 1 | Female | NPT | 13 | 150 psi @ 125° F | Pressure Drop Assisted | 35° to 180° | 6 1/2" | 3 7/8" | 2492N15 | 000000 |