Use these valves in general purpose applications such as those with water, oil, air, and inert gas.

Attach a gauge to the side port on these valves to monitor pressure, temperature, and other measurements in your line. Use with water and air.

An easy-to-read flow-indicating handle shows the percentage the valve is open. These valves are for use with water, oil, inert gas, and steam.

Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components. Use with water, oil, air, inert gas, and steam.

Often used in high-purity applications, such as oxygen service, these valves come cleaned and bagged. Use with water, oil, inert gas, and steam.

A threaded union on these valves makes them easy to install and remove without disrupting your line.

Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. Use with water, oil, air, steam and inert gas such as helium.

Clean and maintain these valves without removing welded connections. They have a three-piece bolted body that disassembles inline for easy access to internal components. Use with water, oil, air, inert gas, and steam.

Weld these valves to unthreaded metal pipe for a permanent, flush connection that permits smooth flow through a line. Use with water, oil, inert gas, and steam.

With a fluoroelastomer seal and a CPVC body, these valves can withstand aggressive and corrosive solutions in chemical-processing applications.

For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces. All have a fluoroelastomer seal and a plastic body that can stand up to aggressive and corrosive solutions in chemical-processing applications.

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves have a fluoroelastomer seal and a plastic body that can withstand aggressive and corrosive solutions in chemical-processing applications.

For use in drinking water systems, these valves meet NSF/ANSI 61.

These valves meet NSF/ANSI 61 for use in drinking water lines.

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves meet NSF/ANSI 61, which means they’re safe to use with drinking water systems.

Use these valves as a mainline shutoff in natural gas and propane pipelines.

Also known as gate valves, these valves gradually open and close to prevent system damage from suddenly starting and stopping flow.

Prevent boiler scale deposits and sediment buildup with these valves designed to meet ASME standards for boiler drainage applications.

Maintain and repair these valves while they’re still inline—you can disassemble the stem so there's no need to unthread the pipe connections. Also known as gate valves, they open and close gradually to prevent sudden starts and stops.

FM-approved for fire suppression and protection, these valves can isolate sections of the water supply in your facility.

Control the flow of steam, hazardous gases, and other vapors without risking leaks. These valves have an accordion-like bellows around the stem that expands as they open and contracts as they close, forming an airtight seal.

With a forged steel body and bolted construction, these valves can withstand nearly 10 times the pressure of other socket-connect gradual valves.

These valves have socket-weld connections for bonding to unthreaded male plastic pipe.

A lightweight alternative to metal valves, these plastic valves have NPT connections for use with threaded pipe. All meet NSF/ANSI 61 for use in drinking water systems.

These solenoid valves operate on electricity to automatically start and stop flow. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

These valves are rated for use in hazardous locations with flammable gas and combustible dust.

Turn the knob to adjust how much these valves will open or close when actuated. They are often used in irrigation and landscaping applications.

To change the flow rate of antifreeze and cleaning solutions, use the adjustment screw or knob to manually set how much these valves will open when actuated.

For use in general purpose applications with water, oil, and inert gas.

A compact, lightweight actuator and an angular body allow you to install these valves in any mounting orientation.

Also known as butterfly valves.

Also known as actuated ball valves, these provide higher flow rates than other air-driven valves.

Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components.

Separate the union fittings on each end of these valves for fast installation and removal from pipelines.

Also known as butterfly valves.

Use these valves to safely transfer fuel and oil.

These valves have threaded NPT connections.

Repair actuated on/off valves from Asco, Burkert, Granzow, and Parker with these kits that include replacement seals, plunger assemblies, and springs.

Attach these valve bodies to your actuator to automatically or manually control flow in your line.

For easy installation and removal from pipelines, all ends on these valves have union fittings that disassemble into multiple pieces. Use with water. Valves divert flow between ports.

For easy installation and removal from pipelines, all ends on these valves have union fittings that disassemble into multiple pieces. Their fluoroelastomer seal and plastic body can withstand aggressive and corrosive solutions for diverting flow between ports in chemical-processing applications.

Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.

Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.

Also known as dry disconnects and double shut-off couplings, these couplings make connecting and disconnecting your line quick and virtually spill-free. Built to stand up to petroleum products, such as diesel fuel and gasoline, their body and gasket are made from materials that won’t corrode from oil.