About half the size of most standard photoelectric switches, these fit comfortably in tight spaces. The transmitter and receiver are built into the housing, so you don’t need to align components or measure sensing distance to install them.

These switches have a receiver built into the housing, eliminating the need to align components and measure sensing distance during installation.

A built-in relay produces AC voltage output. These switches are often used with older programmable logic controllers (PLCs).

Mount these reflectors so they bounce the light beam from your photoelectric switch back to its sensor.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

Rated IP69K, these switches can withstand high-pressure, high-temperature washdowns and temporary submersion.

Detect irregularly shaped items with a band of light up to 10 times larger than the beam on a standard photoelectric switch.

Spanning up to 230 ft.—roughly the length of a commercial airplane—these safety barrier switches cut power to large machinery to prevent damage or injury.

Monitor a wide area around dangerous machinery. If a person or object gets too close, these scanners signal your relay or controller to either trigger a warning or shut down the machinery.

A slim design and a light beam that’s angled upwards allow these switches to sense objects from between conveyor rollers.

Monitor the color of products as they pass by on your line. These transmitters don’t just detect if color is in mint condition—they also turn equipment on or off, all with a single device.

An all-in-one solution for equipment monitoring. These cameras include a lens, sensor, and all the accessories you need to use them out of the box. Use them to keep an eye on harsh industrial processes from a safe distance by placing these cameras inside your machine.