Use these connectors in general purpose residential and commercial applications.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

Charge mobile devices without an adapter.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Keep personnel safe from electric shock by adding ground fault protection to all outlets on the same circuit. These receptacles mount to DIN rail.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

A quarter turn locks these connectors in an outlet to remain secure in high-vibration applications and prevent accidental disconnection. They are not compatible with NEMA configurations.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

Meet international standards IEC 309-1 and 309-2.

Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.

Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Keep personnel safe from electric shock with ground fault protection.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

These curved outlet strips clamp onto a pole or table leg.

Mount these strips into standard 19" wide electronics racks and enclosures.

Power devices above and below your workbench while keeping your outlet strip out of the way.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Designed for indoor use, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Put overhead outlets in arm’s reach.

A locking lever on the socket keeps multiple devices connected to these extension cords.

Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.