Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps for applications involving acids, alkalies, brines, and solvents. Cut them to size with a knife; then pack them into place.

Fill irregularities in valve stem with these soft PTFE seals. They are self-lubricating. Use them in applications involving acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.

Made of PTFE, these V-ring packing seals have excellent chemical resistance and withstand a wide temperature range of -110° F to 500° F. Stack as many V-rings as you need to fill grooves in valves, pumps, and cylinders.

Begin with a male and female adapter, then add V-rings between them to fill the space. Each V-ring adds to the sealing force; the female adapter also has a sealing edge. For a complete seal, you need male and female adapters (sold together) and at least one V-ring (sold in packs of 5).

Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.

Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps. Cut these seals to size with a knife; then pack them into place.

These lubricated PTFE fiber seals stand up to acids, alkalies, brines, and solvents. Use them in pumps and valves. Cut these seals to size with a knife; then pack them into place.

Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps. They're lubricated to prevent overheating. Cut these seals to size with a knife; then pack them into place.

Install between layers of packing seals to ensure lubricants are distributed evenly. Also known as lantern rings, these lubricating rings are made of PTFE. They can be cut with a knife.

These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications. Use them with acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.