Filter by
Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion protects floors from scrapes and gouges and cuts down on noise. It also grips surfaces so vibrating equipment doesn’t slide.
With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Food Industry Std. | Cap. per Mount | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 3 3/8" | 4 1/8" to 5 1/2" | Not Rated | 10° | 2 9/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 lb. | 7" | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 3 3/8" | 4 3/8" to 5 11/16" | Not Rated | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 7 1/4" | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 3 3/8" | 4 3/8" to 5 11/16" | Not Rated | 10° | 4 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 lb. | 7 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 4 1/2" | 5 5/16" to 7 7/8" | Not Rated | 10° | 2 9/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 lb. | 9 3/8" | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 4 1/2" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 9 9/16" | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 3 3/8" | 4 1/8" to 5 1/2" | Not Rated | 10° | 2 9/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 lb. | 7" | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 3 3/8" | 4 3/8" to 5 11/16" | Not Rated | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 7 1/4" | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 3 3/8" | 4 3/8" to 5 11/16" | Not Rated | 10° | 4 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 lb. | 7 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 4 1/2" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 9 9/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1"-8 | 3 3/8" | 4 3/8" to 5 3/4" | Not Rated | 10° | 4 15/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 7,100 lb. | 7 1/4" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
M16 × 2 mm | 5 7/8" | 4 1/8" to 5 1/2" | Not Rated | 10° | 2 9/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 lb. | 7" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
M20 × 2.5 mm | 8 1/4" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 9 9/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Food Industry Std. | Cap. per Mount | Overall Ht. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 5 7/8" | 4" to 5 3/8" | Not Rated | 9° | 3 1/8" | No | 11/32" | 2 1/4" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 6,800 lb. | 6 7/8" | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 8 1/4" | 5 3/16" to 7 3/4" | Not Rated | 9° | 3 1/8" | No | 11/32" | 2 1/4" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 5,400 lb. | 9 1/4" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 5 7/8" | 4" to 5 3/8" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 lb. | 6 7/8" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 8 1/4" | 5 3/16" to 7 3/4" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 lb. | 9 1/4" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1"-8 | 5 7/8" | 4" to 5 3/8" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 lb. | 6 7/8" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1"-8 | 8 1/4" | 5 3/16" to 7 3/4" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 lb. | 9 1/4" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
One Offset Mounting Hole
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.
With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Mounting Hole Dia. | Food Industry Std. | Cap. per Mount | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 5 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 7 3/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8"-11 | 8 1/4" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 9 9/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 5 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 7 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 5 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 lb. | 7 3/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 8 1/4" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 9 9/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4"-10 | 8 1/4" | 5 1/2" to 8 1/16" | Not Rated | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 lb. | 9 9/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
M16 × 2 mm | 5 7/8" | 4 1/8" to 5 1/2" | Not Rated | 10° | 2 9/16" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 lb. | 7" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
M20 × 2.5 mm | 5 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 lb. | 7 3/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||