Use these dispensers for freehand marking. Pull the trigger to release a line of paint.

The five-digit counter on these dispensers measures distance as you go. Pull the trigger to release a line of paint.

Get a controlled, no-drip pour every time.

These efficient hand-held sprayers produce low overspray, so they waste less paint than our other electric sprayers. Use them to spray thin paint, stains, and lacquers.

Tackle high-volume projects while achieving a fine finish. These sprayers can switch from siphon-feed to pressure-feed for thick paint.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Spray paint and light coatings at twice the rate of our light duty electric paint sprayers. These sprayers are portable and have a lightweight spray gun for big projects.

Good for small jobs and frequent color changes, these sprayers have small containers and adjustable controls that make switching between jobs easy.

Control both air and paint flow while you spray, so you can vary the line thickness as you work.

Cover large areas quickly without the need for a paint tray. These rollers have a tube that draws paint into the handle. Squeeze the trigger to keep the roller filled with fresh paint as you go.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.

This water-based paint sprays in an inverted position and will not harm grass or other plant life.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone and xylene.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

A filter/lubricator ensures efficiency and reduces wear on the pump. Often used with hydraulic oil and motor oil in addition to acidic and alkaline liquids, these pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.