These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

A quick-disconnect hose fitting on these nozzles means you can remove and replace them easily to change spray patterns and angles.

These nozzles have replaceable tips that are removable with a quarter-turn.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

These nozzles project their spray at a right angle from their threaded connection.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.

The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.

These nozzles produce a flat, thin spray pattern.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.

Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

Replace the disposable spray heads on these guns after each use for the performance of a new spray gun without having to clean them. High-volume/low-pressure sprayers produce less overspray than other air-powered sprayers to minimize paint waste.

Tackle high-volume projects while achieving a fine finish. These sprayers can switch from siphon-feed to pressure-feed for thick paint.

Replace damaged and worn parts on Binks paint sprayers.

Light and compact, these sprayers apply paint and light coatings faster than air-powered sprayers. They include two spray heads: one for large areas and one for precision jobs and trim.

For high-volume jobs, these sprayers apply paint and coatings at more than four times the rate of our light duty electric paint sprayers. They have a durable motor that automatically adjusts to changes in pressure.

Good for small jobs and frequent color changes, these sprayers have small containers and adjustable controls that make switching between jobs easy.

Add a straw to an aerosol can for precise applications or replace a lost or clogged straw.

Fill small-capacity air-powered sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

To transfer air or oil- and water-based paints, attach this hose to a paint-spray system that has separate hoses for air and paint. Fittings swivel until tightened for easy installation. Fittings with spring guards prevent kinking.