McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    14 Products

    Surface Filler Patches

    Image of Product. Front orientation. Surface Fillers. Surface Filler Patches.
    Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
    Container
    Type
    Lg.
    Wd.
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Max. Temp.,
    ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    Patch4"6"130Yes1:1Yes425ClearSandAluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood74645A79000000
     

    Water-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can, Jar.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar, Bottle.

    Epoxy

    Can, Jar

    Epoxy

    Tube

    Epoxy

    Jar, Bottle

    Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
    Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.
    Container
    Temp.
    Range
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.,
    ° F
    Color
    Process After Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    2Tube560 min.PasteYes1:112 in² @ 1/4"1/2"YesNot Rated200GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood7521A19000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood7521A1500000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood7521A1700000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood7521A1600000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood7521A1800000
     

    Surface Fillers for Rubber

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Rubber.
    Repair worn and torn rubber parts. These two-part fillers are self leveling to form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps. The size listed is the combined total of the two parts.
    For best results, sand or grind the damaged area to improve adhesion. Brush away loose material. Prepare the surface with cleaner and etching agent (sold separately). Use a dispensing gun and mixer nozzle (not included) to apply the fillers, and smooth with the included plastic spatula.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    For Use On
    Each
    Loctite® Surface Fillers
    PC 735013.5Cartridge72Thick LiquidYes1:11/4"Yes-20180BlackEPDM, Polyurethane Rubber
    		2368N10000000
     
    Accessories for Surface Fillers
    Each
    Urethane Cleaner (4-fl. oz. Bottle)2368N3000000
    Etching Agent (3-fl. oz. Bottle)2368N200000
    Dispensing Gun1773A34000000
    Mixer Nozzle2368N40000

    Sealant Primers

    Image of Product. Front orientation. Sealant Primers. Sealant Primers.
    Prepare joints and surfaces to ensure proper sealant adhesion.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Drying
    Time, hr.
    For Use On
    Choose a
    Color
    Each
    Dow
    P520012Bottle2Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS, Polycarbonate, Polystyrene, Polyurethane Rubber, PVC, Glass, CPVC, PETG, PVDF, Polyimide, EPDM, SBR, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron
    Clear
    ,
    Red
    		7442A111000000
    PR-120010.9Bottle2Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Steel, ABS, Polycarbonate, Polystyrene, Polyurethane Rubber, PVC, Glass, CPVC, PETG, PVDF, Polyimide, EPDM, SBR, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron
    Clear
    ,
    Red
    		7442A11200000
     

    Surface Fillers for Plastic

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Plastic, Urethane Rubber, Can.

    Urethane Rubber

    Can

    Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
    Flexane 80 Putty—Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, day
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Devcon Flexane 80 Putty
    158201Can207PuttyYes2.6:190 in² @ 1/4"1/2"Yes-40180BlackSandVinyl Plastic, EPDM, SBR74575A330000000
     
    back to top