McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    123 Products

    High-Strength Grade 5 Titanium Sheets and Bars

    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Sheets
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Sheets and Bars.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    Thk.
    Thk. Tolerance
    Mechanical
    Finish
    Flatness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    Each
    Each
    Each
    Each
    0.016"-0.002" to 0.002"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B2659039K1100000009039K1200000009039K1300000009039K280000000009039K14000000000
    0.032"-0.004" to 0.004"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B2659039K150000009039K160000009039K170000009039K29000000009039K1800000000
    0.063"-0.005" to 0.005"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B2659039K190000009039K210000009039K220000009039K3000000009039K2300000000
    1/8"-0.008" to 0.008"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B2659039K240000009039K250000009039K26000000009039K31000000009039K2700000000
    Bars
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Sheets and Bars.
    Wd.
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    3 ft.
    Long
    1/8" Thk. (-0.01" to 0.01" Tolerance)
    1/2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K11
    0000000
    0000000
    0000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K15
    000000
    000000
    000000
    2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K18
    000000
    000000
    000000
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K19
    000000
    000000
    000000
     
    1/4" Thk. (-0.01" to 0.046" Tolerance)
    1/2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K21
    000000
    000000
    000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K25
    000000
    000000
    000000
    2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K28
    000000
    000000
    000000
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K29
    000000
    000000
    000000
     
    1/2" Thk. (-0.01" to 0.045" Tolerance)
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K49
    000000
    000000
    00000000
     
    3/4" Thk. (-0.01" to 0.06" Tolerance)
    3/4"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K53
    000000
    000000
    000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2659081K55
    000000
    000000
    000000
     

    Ultra-Corrosion-Resistant Grade 2 Titanium Sheets and Bars

    Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Sheets
    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 2 Titanium Sheets and Bars.
    Thk.
    Thk. Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    4" × 4"
    0.02"-0.003" to 0.003"40,000 Not RatedAnnealedASTM B2659051K14700000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K14800000
    0.063"-0.006" to 0.006"40,000 Not RatedAnnealedASTM B2659051K14900000
    0.078"-0.007" to 0.007"40,000 Not RatedAnnealedASTM B2659051K15100000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K15200000
    0.188"0" to 0.05"40,000 Not RatedAnnealedASTM B2659051K15300000
    1/4"0" to 0.05"40,000 Not RatedAnnealedASTM B2659051K15400000
     
    6" × 6"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K6700000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K5500000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K4800000
    0.078"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K11800000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K4200000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K61000000
    1/4"-0.05" to 0.05"40,000 Not RatedAnnealedASTM B2659051K119000000
     
    6" × 12"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K12100000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K12200000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K12300000
    0.078"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K12400000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K125000000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K126000000
    1/4"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K127000000
     
    12" × 12"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K6800000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K5600000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K4900000
    0.078"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K128000000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K43000000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K62000000
    1/4"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K129000000
     
    12" × 24"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K6900000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K57000000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K51000000
    0.078"-0.01" to 0.01"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K131000000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K44000000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K63000000
    1/4"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K132000000
     
    12" × 36"
    0.02"-0.003" to 0.003"40,000 Not RatedAnnealedASTM B2659051K146000000
    1/32"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K141000000
    1/16"-0.006" to 0.006"40,000 Not RatedAnnealedASTM B2659051K142000000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K143000000
     
    24" × 24"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K71000000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K58000000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K52000000
    0.078"-0.01" to 0.01"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K133000000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K45000000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K64000000
    1/4"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K13400000000
     
    24" × 36"
    0.02"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K72000000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K59000000
    0.063"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K53000000
    0.078"-0.01" to 0.01"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K135000000
    1/8"-0.01" to 0.01"40,000 Not RatedAnnealedASTM B2659051K46000000
    0.188"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K6500000000
    1/4"-0.05" to 0.05"40,000Rockwell B65 (Medium)AnnealedASTM B2659051K13600000000
     
    24" × 48"
    0.02"-0.003" to 0.003"40,000 Not RatedAnnealedASTM B2659051K144000000
    0.035"-0.004" to 0.004"40,000 Not RatedAnnealedASTM B2659051K145000000
     
    Bars
    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 2 Titanium Sheets and Bars.
    Wd.
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    3 ft.
    Long
    1/8" Thk. (-0.01" to 0.01" Tolerance)
    1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K11
    000000
    000000
    000000
    3/4"Not Rated40,000 Not RatedAnnealedASTM B2659139K13
    00000
    00000
    00000
    1"Not Rated40,000 Not RatedAnnealedASTM B2659139K15
    00000
    00000
    00000
    1 1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K17
    00000
    00000
    000000
    2"Not Rated40,000 Not RatedAnnealedASTM B2659139K18
    00000
    00000
    000000
    3"Not Rated40,000 Not RatedAnnealedASTM B2659139K19
    00000
    00000
    000000
     
    1/4" Thk. (-0.05" to 0.05" Tolerance)
    1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K21
    00000
    00000
    00000
    1"Not Rated40,000 Not RatedAnnealedASTM B2659139K25
    00000
    00000
    000000
    2"Not Rated40,000 Not RatedAnnealedASTM B2659139K28
    00000
    00000
    000000
     
    3/8" Thk. (-0.06" to 0.06" Tolerance)
    3/8"Not Rated40,000 Not RatedAnnealedASTM B2659101K21
    00000
    00000
    00000
    3/4"Not Rated40,000 Not RatedAnnealedASTM B2659139K33
    00000
    00000
    000000
    1"Not Rated40,000 Not RatedAnnealedASTM B2659139K35
    00000
    00000
    000000
    1 1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K37
    00000
    00000
    000000
    2"Not Rated40,000 Not RatedAnnealedASTM B2659139K38
    00000
    000000
    000000
    3"Not Rated40,000 Not RatedAnnealedASTM B2659139K39
    00000
    000000
    000000
     
    1/2" Thk. (-0.06" to 0.06" Tolerance)
    1/2"Not Rated40,000 Not RatedAnnealedASTM B2659101K22
    00000
    00000
    000000
    3/4"Not Rated40,000 Not RatedAnnealedASTM B2659139K43
    00000
    00000
    000000
    1"Not Rated40,000 Not RatedAnnealedASTM B2659139K45
    00000
    00000
    000000
    1 1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K47
    00000
    000000
    000000
     
    5/8" Thk. (-0.06" to 0.06" Tolerance)
    5/8"Not Rated40,000 Not RatedAnnealedASTM B2659101K23
    00000
    00000
    000000
     
    3/4" Thk. (-0.065" to 0.065" Tolerance)
    3/4"Not Rated40,000 Not RatedAnnealedASTM B2659101K24
    00000
    000000
    000000
    1 1/2"Not Rated40,000 Not RatedAnnealedASTM B2659139K57
    00000
    000000
    000000
    2"Not Rated40,000 Not RatedAnnealedASTM B2659139K58
    000000
    000000
    000000
    3"Not Rated40,000 Not RatedAnnealedASTM B2659139K59
    000000
    000000
    000000
     
    1" Thk. (-0.075" to 0.075" Tolerance)
    1"Not Rated40,000 Not RatedAnnealedASTM B2659139K65
    00000
    000000
    000000
    2"Not Rated40,000 Not RatedAnnealedASTM B2659139K68
    000000
    000000
    000000
    3"Not Rated40,000 Not RatedAnnealedASTM B2659139K69
    000000
    000000
    000000
     

    Ultra-Corrosion-Resistant Grade 4 Titanium Sheets

    With a higher iron and oxygen content, Grade 4 titanium is the strongest of the commercially pure titanium alloys, Grades 1 through 4. Although not as strong as Grade 5 titanium, Grade 4 is more corrosion resistant, so it stands up to hydrochloric and sulfuric acids, sodium-hydroxide and ammonia alkalis, and chlorides. Use it in areas where strength and corrosion resistance are a must, such as in chemical processing and marine environments.
    Grade 4 titanium has good formability and ductility, however it is not as good as Grades 1 through 3. It also has a good strength-to-weight ratio and can withstand impacts at low temperatures.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Sheets
    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 4 Titanium Sheets.
    6" × 6"
    12" × 12"
    24" × 24"
    Thk.
    Thk. Tolerance
    Flatness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    Each
    Each
    0.016"-0.002" to 0.002"Not Rated81,000 Not RatedAnnealedASTM B2657240N1110000007240N1120000007240N1140000000
    0.04"-0.004" to 0.004"Not Rated81,000 Not RatedAnnealedASTM B2657240N122000007240N1230000007240N125000000
    0.063"-0.005" to 0.005"Not Rated81,000 Not RatedAnnealedASTM B2657240N116000007240N117000000———0
    0.08"-0.005" to 0.005"Not Rated81,000 Not RatedAnnealedASTM B2657240N127000007240N128000000———0
    back to top