These pants meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These pants are made of a breathable cotton/nylon blend that’s lightweight, yet durable. Cuffs are open to fit over work boots. They have two waist pockets and two rear pockets.

Find your waist size by measuring just above the top of your hip bone.

These overalls meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of modacrylic/aramid blend, these overalls are extremely durable. They have adjustable suspenders; tighten or loosen them to modify the fit. Adjust the hook and loop straps on the cuffs to tighten pant legs around boots.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.

They all comply with OSHA 29 CFR 1910.269 standards for flame and arc flash protection.

Cotton/acrylic base layers are stretchy for increased mobility and range of motion.

Keep dry in wet and rainy conditions. All suits include a hooded jacket with snaps down the front.

PVC is lightweight and good for single-use applications. The jackets have two waist pockets and snaps on the cuffs. The hood is detachable.

PVC-coated polyester provides good resistance to water and abrasion. They are washable. The jackets have a storm flap and two waist pockets. Suits with pants have open cuffs on the sleeve and snaps on the legs to fit easily inside boots. Suits with bib overalls have snap cuffs on the sleeve and open cuffs on the bottom of the legs.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool. The jackets have a storm flap, snaps on the cuffs, and a detachable hood. They are washable.

Bib overalls have adjustable suspenders to modify the length.

Pants have an elastic waist.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

Protect against chemical spills and splashes. These suits are polyester with a PVC coating inside and out. They have snaps down the front and a storm flap to keep liquid splashes out. Sleeves and bib overalls have open cuffs to fit over gloves and boots. Bib overalls have adjustable suspenders to modify the length.

Fasten a hood (sold separately) to jackets with collar snaps.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These overalls meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 vest, shirt, or jacket to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). They are polyamide-coated polyester to keep you dry in wet and rainy conditions. They have snaps on the cuffs, adjustable suspenders to modify the length, and a hook and loop chest pocket.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Keep dry in wet and rainy conditions. These pants resist mildew and are washable. All pants have a waist drawstring for an adjustable fit and snaps on the cuffs.

PVC-coated polyester provides good resistance to water and abrasion.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

Just like the scrubs worn in hospitals, these pants are soft and comfortable for all-day wear. They’re made of 55% cotton and 45% polyester. They are reversible with one rear pocket on each side.

Find your waist size by measuring just above the top of your hip bone.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. These pants meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 garment to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). Made of polyester fabric, these pants are lightweight and moisture wicking to keep you cool. They have an elastic waist, hip slits, and snaps on the cuffs.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These pants have no pockets so they won’t trap hot particles. They have durable leather belt loops, as well as buttons for suspenders. Cuffs are open to fit over boots.

Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.

Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.

PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.

Find your waist size by measuring just above the top of your hip bone. Pants are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the pants.

Use these waders to stay dry when you’re in deep water, mud, and sludge. Straps are adjustable to modify the fit; loop through your belt and secure with a snap. All waders fit over socks.

PVC is oil resistant. Blended rubber is more abrasion resistant than PVC.

Waders with a safety toe meet ASTM F2413 standards for protection against impact and compression.

Waders with a shank provide arch support by distributing weight during strenuous work, such as climbing ladders.

Waders with a reinforced midsole protect against punctures when working around sharp objects, such as glass, nails, and scrap metal.

Inner and outer seam lengths are approximate and measured from the bottom of the heel to the top of the wader.