This paper is double-bagged to keep out contaminants and meets Fed. Std. Class 100 and ISO Class 5 clean room standards.

Print signs, labels, checklists, and packing slips for use around food processing lines without the risk of contaminating the food. A thin layer of aluminum foil is laminated within this paper, so it can be picked up by a metal detector if any piece of it falls into your line.

These note pads come double-bagged to keep out contaminants and meet Fed. Spec. Class 100 and ISO Class 5 clean room standards.

These note pads retain all printed information even in environments with corrosive chemicals and high-pressure washdowns.

Protect desks and other surfaces from scratches, writing marks, and stains.

Keep sanding sheets of various grits on hand.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

A thicker, heavier construction than standard rolls withstands tough sanding.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.

A coating prevents dust and debris from building up on the abrasive surface.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Keep a selection of flat and angled sponges with various grits on hand.

These sponges conform exceptionally well to small, contoured surfaces.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.

These assortments include a selection of sanding sponges with long-lasting diamond abrasive on one side. Flexible enough to sand around curves and in corners, they provide the comfort and control of a sanding block.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

Cut the length you need, then quickly attach, remove, and reuse.

Quickly attach, remove, and reuse.

These sheets have a long-lasting diamond abrasive.

A coating prevents dust and debris from building up on the abrasive surface.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Quickly attach and remove these hook and loop sheets to detail sanders. These sheets squeeze into corners and along edges and angled surfaces.

Keep hook and loop sanding sheets in a variety of grits on hand for your detail sander.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Use these sheets with pole sanders.

Press onto a compatible sanding tool or backup pad; peel off to remove.

The premium abrasive stays sharp longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.

Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes.

Avoid clogs when you're removing paint or rust. The widely spaced grains on these belts give dust and debris a place to collect so they won't build up on the surface.

Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece.

These belts last at least 50% longer and sand faster than standard ceramic alumina belts.

When you need to achieve a more consistent finish, choose nylon mesh sanding belts over paper- or cloth-backed belts.

Made of nylon mesh, these belts compensate for uneven sanding pressure to create a smooth, consistent finish on workpieces.

At least 16" wide, these sanding belts leave a smooth, consistent finish on large workpieces. They have an aluminum oxide abrasive, which is the most common abrasive for general use.

Leave a smooth, consistent finish on wide workpieces.

Make more contact with curved surfaces for a more consistent finish than you’d get with a standard sander. These belt sanders flex 180° around pipe, tubing, and handrails.

The narrow belt is good for sanding in tight spaces.

These sanders have a belt-release lever for quick changes.

When you can’t access an outlet or air compressor, these battery-powered sanders tackle quick sanding jobs. Often used for smoothing spot welds, the narrow belt squeezes into corners, grooves, and other tight areas.

For even wear across the sanding belt, these sanders move the belt up and down as it rotates. Position these sanders at the angle you need to best access your workpiece.

The most versatile sanders we offer—you can set them up in four different ways to sand flat edges, curved surfaces, inner radii, and more.

Compact and lightweight, these combination sanders are best for small projects and touch-ups.

For quick jobs where you don’t have access to a power source, these sanders are battery-powered. They’re more aggressive than orbital disc sanders because they use rotary motion to remove more material.

Create a consistent finish on quick sanding jobs where you don’t have access to air or electric power.

With a fixed rotary movement, these sanders remove more material from workpieces than random orbital sanders.

Originally designed to repair the clear coat on cars, these sanders smooth out imperfections on your most delicate workpieces. With a 1 1/4" disc that moves in a very small circular pattern, they remove tiny specks of dust that are trapped in the finish.

Dissipate electrostatic discharge (ESD) for safety when sanding. Also known as random orbital sanders, these sanders move in small irregular circles.