About Sanding Abrasives
More
Sheet Sanding Blocks
Sand by hand with comfort and control. Cut sanding sheets and rolls (both sold separately) to size to fit these blocks. For additional abrasive materials and grits, see our full offering of sanding sheets and sanding rolls.
Style A blocks have both a flat side and a curved side for sanding. The flat side is best for flat surfaces, and the curved side is good for curves and contours.
Style C blocks have a cushioned, ergonomic grip for comfort while you sand.
Style D and E blocks are extra long to sand large surfaces with a more consistent finish/flatness than smaller sanding blocks. Style D have two handles, so you can apply more pressure to remove more material. Use hard-density blocks on flat surfaces. Use soft-density blocks on contoured surfaces.
| Wd. | Lg. | Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Pkg. Qty. | Pkg. | |
Clip On | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Rough Finish | |||||||||
| 2 3/4" | 9" | 80 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 15 | 0000000 | 00000 |
For Smooth Finish | |||||||||
| 2 3/4" | 9" | 100 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 15 | 0000000 | 0000 |
| 2 3/4" | 9" | 120 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 15 | 0000000 | 0000 |
| 2 3/4" | 9" | 150 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 15 | 0000000 | 0000 |
Adhesive Back | |||||||||
For Rough Finish | |||||||||
| 2 3/4" | 16 1/2" | 60 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 50 | 0000000 | 00000 |
| 2 3/4" | 16 1/2" | 80 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 50 | 0000000 | 00000 |
For Smooth Finish | |||||||||
| 2 3/4" | 16 1/2" | 120 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 50 | 0000000 | 00000 |
| 2 3/4" | 16 1/2" | 180 | Steel, Wood | Aluminum Oxide | Paper | Clog Resistant | 50 | 0000000 | 00000 |
Flexible Hand Sanding Blocks for Discs
Made of foam, these blocks flex to sand around curves. Use with adhesive-back discs (sold separately).
Nylon Mesh Pad Sanding Blocks
Attach a nylon mesh sanding pad (sold separately) to these blocks for improved comfort and control. Teeth on the bottom of the block sink into the mesh of the sanding pad to hold it in place. Use them with pads at least the size of your block. They're most commonly used with standard 6” Wd. × 9” Lg. sanding pads.
For technical drawings and 3-D models, click on a part number.
| Wd. | Lg. | Material | Each | ||
| B | 3 1/4" | 5 1/2" | Rubber | 00000000 | 00000 |
Disc Sanding Blocks
Attach sanding discs to these hand sanding blocks.
Style A are ideal for sanding flat surfaces.
Style B have a contoured grip for added comfort and control. They have a small diameter that makes them good for detailing.
Style C are reversible, so you can attach a sanding disc to either end. One end is firm for material removal, while the other is cushioned for gentle finishing. They have a small diameter that makes them good for detailing.
