Pocket-Sized Pulley Aligning Lasers
Slip this laser into your pocket so it's on hand to align belts, pulleys, chain, and sprockets. Place the tool against the side of your pulley or sprocket and project the laser onto the included target to detect angular or offset misalignment. They mount magnetically, so you don’t need any fasteners to secure them. The surface of the laser is machined, so it sits flush against flat surfaces for easy and precise alignment. They’re powered by a disposable battery, so they’re portable.
Style B lasers have a threaded tip, so they’re compatible with converters that change the shape of the laser, so you can perform a variety of tasks with the same tool.
O'all | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. Pulley Spacing | Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Tolerance per Foot | Lg. | Wd. | Ht. | Magnet Material | Batteries Included | No. of Batteries Required | Battery Size | Each | |
| A | 100 ft. | 0.250" @ 100 ft. | 200 ft. | 3/8" @ 100 ft. | Class II | 650 | 0.0025" | 1 3/4" | 5/8" | 1" | Neodymium | No | 4 | 386 | 000000 | 0000000 |
| B | 50 ft. | 0.125" @ 100 ft. | 400 ft. | 3/8" @ 100 ft. | Class IIIa | 650 | 0.0013" | 2 1/4" | 5/8" | 1" | Neodymium | No | 4 | 386 | 0000000 | 000000 |
| Component | Line Size | Dotted Line Size | Each | |
| 90° Beam Splitter | __ | __ | 000000000 | 0000000 |
| Dot-to-Dotted Line Converter | __ | 2" @ 1 ft. | 000000000 | 000000 |
| Dot-to-Line Converter | 8" @ 1 ft. | __ | 000000000 | 00000 |
| Dot-to-Line Converter | 6" @ 1 ft. | __ | 000000000 | 00000 |
| Dot-to-Line Converter | 28" @ 1 ft. | __ | 000000000 | 00000 |
| Dot-to-Line Converter | 16" @ 1 ft. | __ | 000000000 | 00000 |
Laser Directing Components
Direct laser beams where you need them with components that turn or split your beam. They work with any dot laser.
Mirror requires a holder to mount to a standoff.
90° turning mirror screws into a standoff.
90° beam splitter converts a single dot into two dots; one continues in a straight line, the other projects at a 90° angle. The splitter screws into a standoff.
Dot-to-line converter requires a holder to mount to a standoff.
Standoffs have 8-32 male threads on one end and 1/4"-20 female threads on the other. Diameter is 1/2". For additional lengths, see 18-8 Stainless Steel Standoffs.
for Mirror and
Beam Converters
Holder for Mirror
and Beam Converters
| Component | Max. Tilt Angle | Max. Rotation Angle | Each | |
| Mirror | __ | __ | 0000000 | 000000 |
| 90° Turning Mirror | __ | __ | 0000000 | 000000 |
| 90° Beam Splitter | __ | __ | 0000000 | 000000 |
| Dot-to-Line Converter | __ | __ | 0000000 | 000000 |
| Fixed Holder for Mirror and Beam Converters | __ | __ | 0000000 | 00000 |
| Adjustable-Angle Holder for Mirror and Beam Converters | 4° | __ | 0000000 | 00000 |
| Magnetic Mount | __ | __ | 0000000 | 00000 |
| Adjustable-Angle Mount | __ | 180° | 0000000 | 000000 |