We will reply to your message within an hour.
More
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
Discharge up to 300 gallons of water and particles per hour—these filters handle compressed air that’s high in moisture content.
Mount these filters to a 35 mm DIN rail with the included brackets.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.
Quickly install these filters on your air line—no pipe nipples or joiner clamps required. Their push-to-connect fittings create tight seals around tubing.
Remove particles from large volumes of compressed air without causing restriction or drops in pressure.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.
No need to buy and service two filters—these filters have a single element that removes both oil and particles.
Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
These filter elements fit in Aventics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Separators remove 99% of particles from air, gas, and steam lines and have no filter cartridges or baskets to clean and replace.
Spin liquid samples at speeds up to 4,500 rpm to separate heavier particles from lighter ones.