Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound.

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Make castings and fill voids with these two-part pourable epoxies.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Roll the seams where wall coverings meet for an even, continuous appearance.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

Smooth and spread grout between tiles.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Rub these tools along the mortar between bricks for a uniform, finished appearance.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

Cut perfect circles up to 16" in diameter to create openings for pipes, conduit, or lighting fixtures.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Stakes provide a firm anchor for concrete form boards.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Make removing form-board stakes easier.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Spread patching compounds in dry, wet, and even water-filled holes.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Dispense ready-to-use conductive liquid to fill pits and small gaps on circuit board components.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Keep the surface of your porcelain fixtures looking like new.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Waterproof and strong, these surface fillers remain flexible when repairing rips, tears, and holes in neoprene rubber. They're often used on wetsuits.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Quickly set foam backer rods in caulk joints at a consistent depth without puncturing them.

Apply the included adhesive to patches and use to repair holes in vinyl-coated and vinyl-laminated tarps.